Hi Biju,
On Fri, Aug 23, 2024 at 01:52:14PM +0000, Biju Das wrote:
> On Friday, August 23, 2024 2:15 PM, Laurent Pinchart wrote:
> > On Thu, Aug 22, 2024 at 05:23:13PM +0100, Biju Das wrote:
> > > This patch series aims to add support for RZ/G2UL DU.
> > >
> > > The LCD controller is composed of Frame Compression Processor (FCPVD),
> > > Video Signal Processor (VSPD), and Display Unit (DU).
> > >
> > > The output of LCDC is connected display parallel interface (DPI) and
> > > supports a maximum resolution of WXGA along with 2 RPFs to support the
> > > blending of two picture layers and raster operations (ROPs)
> > >
> > > It is similar to LCDC IP on RZ/G2L SoCs, but does not have DSI interface.
> > >
> > > v3->v4:
> > > * Restored the ports property for RZ/G2UL and described port@0 for the
> > > DPI interface in bindings patch.
> > > * Restored tags from Geert and Conor as the change is trivial
> > > (Replaced port 1->0 from v2).
> > > * Used "&" instead of "==" in rzg2l_du_start_stop() for scalability.
> > > * Restored port variable in struct rzg2l_du_output_routing
> > > * Updated rzg2l_du_encoders_init() to handle port based on hardware indices.
> > > * Restored ports property in du node and used port@0 for connected
> > > DPI interface.
> > > v2->v3:
> > > * Split patch series based on subsystem from DU patch series [1].
> > > * Replaced ports->port property for RZ/G2UL as it supports only DPI
> > > and retained ports property for RZ/{G2L,V2L} as it supports both DSI
> > > and DPI output interface.
> > > * Added missing blank line before example.
> > > * Dropped tags from Conor and Geert as there are new changes in bindings
> > > * Avoided the line break in rzg2l_du_start_stop() for rstate.
> > > * Replaced port->du_output in struct rzg2l_du_output_routing and
> > > dropped using the port number to indicate the output type in
> > > rzg2l_du_encoders_init().
> > > * Updated rzg2l_du_r9a07g043u_info and rzg2l_du_r9a07g044_info.
> > >
> > > [1] https://lore.kernel.org/all/20240709135152.185042-1-biju.das.jz@xxxxxxxxxxxxxx/
> > > v1->v2:
> > > * Updated cover letter header "DU IP->Display Unit".
> > > * Updated commit description related to non ABI breakage for patch#3.
> > > * Added Ack from Conor for binding patches.
> > >
> > > Biju Das (4):
> > > dt-bindings: display: renesas,rzg2l-du: Document RZ/G2UL DU bindings
> > > drm: renesas: rz-du: Add RZ/G2UL DU Support
> >
> > The first two patches look good to me. Do you have access to drm-misc, will you push them yourself, or
> > do you expect a maintainer to pick them up ?
>
> I don’t have access to drm-misc. I expect a maintainer to pick it up(Maybe via rcar-du tree or
> drm-misc tree), or else if it is ok, what is the procedure to get access for drm-misc tree??
You can find instructions to request drm-misc commit access at
https://drm.pages.freedesktop.org/maintainer-tools/committer/commit-access.html
Tomi, to avoid delays, could you push the first two patches to drm-misc
?
> > > arm64: dts: renesas: r9a07g043u: Add DU node
> > > arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
> > >
> > > .../bindings/display/renesas,rzg2l-du.yaml | 32 ++++-
> > > arch/arm64/boot/dts/renesas/r9a07g043u.dtsi | 25 ++++
> > > .../boot/dts/renesas/r9a07g043u11-smarc.dts | 111 ++++++++++++++++++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 8 +-
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 11 ++
> > > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 3 +-
> > > 6 files changed, 185 insertions(+), 5 deletions(-)
--
Regards,
Laurent Pinchart
