On 14:32-20240730, Markus Schneider-Pargmann wrote:
> Hi Nishanth,
>
> On Tue, Jul 30, 2024 at 07:09:58AM GMT, Nishanth Menon wrote:
> > On 10:00-20240729, Markus Schneider-Pargmann wrote:
> > > WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC
> > > in that case.
> > >
> > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/ti/k3-pinctrl.h | 3 +++
> > > 1 file changed, 3 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> > > index 22b8d73cfd32..dd4d53e8420a 100644
> > > --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
> > > +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> > > @@ -12,6 +12,7 @@
> > > #define PULLTYPESEL_SHIFT (17)
> > > #define RXACTIVE_SHIFT (18)
> > > #define DEBOUNCE_SHIFT (11)
> > > +#define WKUP_EN_SHIFT (29)
> > >
> > > #define PULL_DISABLE (1 << PULLUDEN_SHIFT)
> > > #define PULL_ENABLE (0 << PULLUDEN_SHIFT)
> > > @@ -38,6 +39,8 @@
> > > #define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT)
> > > #define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT)
> > >
> > > +#define WKUP_EN (1 << WKUP_EN_SHIFT)
> > > +
> >
> > Are we using this?
>
> Yes, this needs to be used in pinctrl for the relevant pins. The users
> are not part of this series, as it will probably be in devicetree
> overlays or maybe future board files.
>
> This is an example configuration for mcu_mcan0 that is required to
> enable support for wakeup from Partial-IO:
>
> &mcu_pmx0 {
> mcu_mcan0_tx_pins_default: mcu-mcan0-tx-pins-default {
> pinctrl-single,pins = <
> AM62X_IOPAD(0x034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */
> >;
> };
>
> mcu_mcan0_rx_pins_default: mcu-mcan0-rx-pins-default {
> pinctrl-single,pins = <
> AM62X_IOPAD(0x038, PIN_INPUT, 0) /* (B3) MCU_MCAN0_RX */
> >;
> };
>
> mcu_mcan0_rx_pins_wakeup: mcu-mcan0-rx-pins-wakeup {
> pinctrl-single,pins = <
> AM62X_IOPAD(0x038, PIN_INPUT | WKUP_EN, 0) /* (B3) MCU_MCAN0_RX */
> >;
> };
> };
>
> &mcu_mcan0 {
> pinctrl-names = "default", "wakeup";
> pinctrl-0 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_default>;
> pinctrl-1 = <&mcu_mcan0_tx_pins_default>, <&mcu_mcan0_rx_pins_wakeup>;
> status = "okay";
> };
Please introduce at least 1 user in the series? or if there are
dependencies, then we can hold back this patch till the right users are
available.
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
