Re: [PATCH v3 2/3] iio: ABI: generalize shunt_resistor attribute

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 22 Jul 2024 12:03:19 +0200
Matteo Martelli <matteomartelli3@xxxxxxxxx> wrote:

> Move ABI documentation for custom shunt resistor attributes into the
> generic iio documentation file. Exception for pac1934: leave it
> untouched since it does not comply with common iio ABI generalization.
> 
> Signed-off-by: Matteo Martelli <matteomartelli3@xxxxxxxxx>
This stands on it's own even if the driver needs a minor tweak or two yet.
Hence in the interests of not having to remember I've read it before,
I've queued this patch up;


Applied to the testing branch of iio.git. That will be rebased on rc1 once
available and pushed out as togreg for linux-next to pick it up.

Thanks,

Jonathan

> ---
>  Documentation/ABI/testing/sysfs-bus-iio             |  8 ++++++++
>  Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 | 17 -----------------
>  Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc  |  9 ---------
>  3 files changed, 8 insertions(+), 26 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index 7cee78ad4108..935d67fd1a43 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -2289,3 +2289,11 @@ KernelVersion:	6.7
>  Contact:	linux-iio@xxxxxxxxxxxxxxx
>  Description:
>  		List of available timeout value for tap gesture confirmation.
> +
> +What:		/sys/.../iio:deviceX/in_shunt_resistor
> +What:		/sys/.../iio:deviceX/in_current_shunt_resistor
> +What:		/sys/.../iio:deviceX/in_power_shunt_resistor
> +KernelVersion:	6.10
> +Contact:	linux-iio@xxxxxxxxxxxxxxx
> +Description:
> +		The value of current sense resistor in Ohms.
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
> deleted file mode 100644
> index 6d2d2b094941..000000000000
> --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
> -Date:		March 2017
> -KernelVersion:	4.12
> -Contact:	linux-iio@xxxxxxxxxxxxxxx
> -Description: 	The value of the shunt resistor used to compute power drain on
> -                common input voltage pin (RS+). In Ohms.
> -
> -What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
> -Date:		March 2017
> -KernelVersion:	4.12
> -Contact:	linux-iio@xxxxxxxxxxxxxxx
> -Description: 	The value of the shunt resistor used to compute current flowing
> -                between RS+ and RS- voltage sense inputs. In Ohms.
> -
> -These attributes describe a single physical component, exposed as two distinct
> -attributes as it is used to calculate two different values: power load and
> -current flowing between RS+ and RS- inputs.
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
> index 8916f7ec6507..8dbca113112d 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
> @@ -13,12 +13,3 @@ Description:
>  		available for reading data. However, samples can be occasionally skipped
>  		or repeated, depending on the beat between the capture and conversion
>  		rates.
> -
> -What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
> -Date:		December 2015
> -KernelVersion:	4.4
> -Contact:	linux-iio@xxxxxxxxxxxxxxx
> -Description:
> -		The value of the shunt resistor may be known only at runtime fom an
> -		eeprom content read by a client application. This attribute allows to
> -		set its value in ohms.
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux