[PATCH v3 2/3] iio: ABI: generalize shunt_resistor attribute

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Move ABI documentation for custom shunt resistor attributes into the
generic iio documentation file. Exception for pac1934: leave it
untouched since it does not comply with common iio ABI generalization.

Signed-off-by: Matteo Martelli <matteomartelli3@xxxxxxxxx>
---
 Documentation/ABI/testing/sysfs-bus-iio             |  8 ++++++++
 Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 | 17 -----------------
 Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc  |  9 ---------
 3 files changed, 8 insertions(+), 26 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 7cee78ad4108..935d67fd1a43 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -2289,3 +2289,11 @@ KernelVersion:	6.7
 Contact:	linux-iio@xxxxxxxxxxxxxxx
 Description:
 		List of available timeout value for tap gesture confirmation.
+
+What:		/sys/.../iio:deviceX/in_shunt_resistor
+What:		/sys/.../iio:deviceX/in_current_shunt_resistor
+What:		/sys/.../iio:deviceX/in_power_shunt_resistor
+KernelVersion:	6.10
+Contact:	linux-iio@xxxxxxxxxxxxxxx
+Description:
+		The value of current sense resistor in Ohms.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
deleted file mode 100644
index 6d2d2b094941..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
+++ /dev/null
@@ -1,17 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
-Date:		March 2017
-KernelVersion:	4.12
-Contact:	linux-iio@xxxxxxxxxxxxxxx
-Description: 	The value of the shunt resistor used to compute power drain on
-                common input voltage pin (RS+). In Ohms.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
-Date:		March 2017
-KernelVersion:	4.12
-Contact:	linux-iio@xxxxxxxxxxxxxxx
-Description: 	The value of the shunt resistor used to compute current flowing
-                between RS+ and RS- voltage sense inputs. In Ohms.
-
-These attributes describe a single physical component, exposed as two distinct
-attributes as it is used to calculate two different values: power load and
-current flowing between RS+ and RS- inputs.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
index 8916f7ec6507..8dbca113112d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
+++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
@@ -13,12 +13,3 @@ Description:
 		available for reading data. However, samples can be occasionally skipped
 		or repeated, depending on the beat between the capture and conversion
 		rates.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
-Date:		December 2015
-KernelVersion:	4.4
-Contact:	linux-iio@xxxxxxxxxxxxxxx
-Description:
-		The value of the shunt resistor may be known only at runtime fom an
-		eeprom content read by a client application. This attribute allows to
-		set its value in ohms.

-- 
2.45.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux