Hi Sylwester, Thank you for the review. On Monday 09 March 2015 11:35:52 Sylwester Nawrocki wrote: > On 08/03/15 14:45, Laurent Pinchart wrote: > > +++ b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt > > @@ -0,0 +1,41 @@ > > +* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor > > + > > +The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor > > with > > +an active array size of 752H x 480V. It is programmable through a simple > > +two-wire serial interface. > > + > > +Required Properties: > > + > > +- compatible: value should be either one among the following > > + (a) "aptina,mt9v032" for MT9V032 color sensor > > + (b) "aptina,mt9v032m" for MT9V032 monochrome sensor > > + (c) "aptina,mt9v034" for MT9V034 color sensor > > + (d) "aptina,mt9v034m" for MT9V034 monochrome sensor > > It can't be determined at runtime whether the sensor is just monochromatic ? Unfortunately not. As far as I'm aware the only difference between the monochromatic and color sensors is the colour filter array. The register set is identical. > Al in all the color filter array is a physical property of the sensor, > still the driver seems to be ignoring the "m" suffix. No, the driver relies on the I2C core filling returning the I2C device id instance corresponding to the DT compatible string, and gets sensor model information from id->driver_data. > Hence I suspect the > register interfaces for both color and monochromatic versions are > compatible. I'm wondering whether using a boolean property to indicate the > color filter array type would do as well. That's an option as well, yes. I don't have a strong preference at the moment, but it should be noted that the "m" suffix is contained in the chip's part number. MT9V032C12STM MT9V032C12STC MT9V032C12STMD MT9V032C12STMH MT9V032C12STCD MT9V032C12STCH Granted, they use "c" for colour sensors, which the DT bindings don't use, and a "C12ST" that we completely ignore. > > +static struct mt9v032_platform_data * > > +mt9v032_get_pdata(struct i2c_client *client) > > +{ > > + struct mt9v032_platform_data *pdata; > > + struct v4l2_of_endpoint endpoint; > > + struct device_node *np; > > + struct property *prop; > > + > > + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) > > + return client->dev.platform_data; > > + > > + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL); > > + if (!np) > > + return NULL; > > + > > + if (v4l2_of_parse_endpoint(np, &endpoint) < 0) > > + goto done; > > + > > + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); > > + if (!pdata) > > + goto done; > > + > > + prop = of_find_property(np, "link-freqs", NULL); > > I suspect you meant "link-frequencies" here ? Indeed, good catch. I'll fix that. > > + if (prop) { > > + size_t size = prop->length / 8; > > + u64 *link_freqs; > > + > > + link_freqs = devm_kzalloc(&client->dev, > > + size * sizeof(*link_freqs), > > + GFP_KERNEL); > > + if (!link_freqs) > > + goto done; > > + > > + if (of_property_read_u64_array(np, "link-frequencies", > > + link_freqs, size) < 0) > > + goto done; > > + > > + pdata->link_freqs = link_freqs; > > + pdata->link_def_freq = link_freqs[0]; > > + } > > + > > + pdata->clk_pol = !!(endpoint.bus.parallel.flags & > > + V4L2_MBUS_PCLK_SAMPLE_RISING); > > + > > +done: > > + of_node_put(np); > > + return pdata; > > +} > > > > @@ -1034,9 +1086,21 @@ static const struct i2c_device_id mt9v032_id[] = { > > > > }; > > MODULE_DEVICE_TABLE(i2c, mt9v032_id); > > > > +#if IS_ENABLED(CONFIG_OF) > > +static const struct of_device_id mt9v032_of_match[] = { > > + { .compatible = "mt9v032" }, > > + { .compatible = "mt9v032m" }, > > + { .compatible = "mt9v034" }, > > + { .compatible = "mt9v034m" }, > > + { /* Sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(of, mt9v032_of_match); > > +#endif -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html