Hi Laurent,
On 08/03/15 14:45, Laurent Pinchart wrote:
> +++ b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
> @@ -0,0 +1,41 @@
> +* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
> +
> +The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
> +an active array size of 752H x 480V. It is programmable through a simple
> +two-wire serial interface.
> +
> +Required Properties:
> +
> +- compatible: value should be either one among the following
> + (a) "aptina,mt9v032" for MT9V032 color sensor
> + (b) "aptina,mt9v032m" for MT9V032 monochrome sensor
> + (c) "aptina,mt9v034" for MT9V034 color sensor
> + (d) "aptina,mt9v034m" for MT9V034 monochrome sensor
It can't be determined at runtime whether the sensor is just monochromatic ?
Al in all the color filter array is a physical property of the sensor, still
the driver seems to be ignoring the "m" suffix. Hence I suspect the register
interfaces for both color and monochromatic versions are compatible.
I'm wondering whether using a boolean property to indicate the color filter
array type would do as well.
> +static struct mt9v032_platform_data *
> +mt9v032_get_pdata(struct i2c_client *client)
> +{
> + struct mt9v032_platform_data *pdata;
> + struct v4l2_of_endpoint endpoint;
> + struct device_node *np;
> + struct property *prop;
> +
> + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
> + return client->dev.platform_data;
> +
> + np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
> + if (!np)
> + return NULL;
> +
> + if (v4l2_of_parse_endpoint(np, &endpoint) < 0)
> + goto done;
> +
> + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + goto done;
> +
> + prop = of_find_property(np, "link-freqs", NULL);
I suspect you meant "link-frequencies" here ?
> + if (prop) {
> + size_t size = prop->length / 8;
> + u64 *link_freqs;
> +
> + link_freqs = devm_kzalloc(&client->dev,
> + size * sizeof(*link_freqs),
> + GFP_KERNEL);
> + if (!link_freqs)
> + goto done;
> +
> + if (of_property_read_u64_array(np, "link-frequencies",
> + link_freqs, size) < 0)
> + goto done;
> +
> + pdata->link_freqs = link_freqs;
> + pdata->link_def_freq = link_freqs[0];
> + }
> +
> + pdata->clk_pol = !!(endpoint.bus.parallel.flags &
> + V4L2_MBUS_PCLK_SAMPLE_RISING);
> +
> +done:
> + of_node_put(np);
> + return pdata;
> +}
> @@ -1034,9 +1086,21 @@ static const struct i2c_device_id mt9v032_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, mt9v032_id);
>
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id mt9v032_of_match[] = {
> + { .compatible = "mt9v032" },
> + { .compatible = "mt9v032m" },
> + { .compatible = "mt9v034" },
> + { .compatible = "mt9v034m" },
> + { /* Sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mt9v032_of_match);
> +#endif
--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
