Parse DT properties into a platform data structure when a DT node is
available.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/media/i2c/mt9v032.txt | 41 ++++++++++++++
MAINTAINERS | 1 +
drivers/media/i2c/mt9v032.c | 66 +++++++++++++++++++++-
3 files changed, 107 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9v032.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
new file mode 100644
index 0000000..75c97de
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
@@ -0,0 +1,41 @@
+* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
+
+The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
+an active array size of 752H x 480V. It is programmable through a simple
+two-wire serial interface.
+
+Required Properties:
+
+- compatible: value should be either one among the following
+ (a) "aptina,mt9v032" for MT9V032 color sensor
+ (b) "aptina,mt9v032m" for MT9V032 monochrome sensor
+ (c) "aptina,mt9v034" for MT9V034 color sensor
+ (d) "aptina,mt9v034m" for MT9V034 monochrome sensor
+
+Optional Properties:
+
+- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
+ expressed as a 64-bit big-endian integer.
+
+For further reading on port node refer to
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ ...
+ mt9v032@5c {
+ compatible = "aptina,mt9v032";
+ reg = <0x5c>;
+
+ port {
+ mt9v032_1: endpoint {
+ link-frequencies =
+ <0 13000000>, <0 26600000>,
+ <0 27000000>;
+ };
+ };
+ };
+ ...
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ddc5a8c..180f6fb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6535,6 +6535,7 @@ M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
T: git git://linuxtv.org/media_tree.git
S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/mt9v032.txt
F: drivers/media/i2c/mt9v032.c
F: include/media/mt9v032.h
diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c
index 3267c18..a6ea091 100644
--- a/drivers/media/i2c/mt9v032.c
+++ b/drivers/media/i2c/mt9v032.c
@@ -17,6 +17,8 @@
#include <linux/i2c.h>
#include <linux/log2.h>
#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
@@ -26,6 +28,7 @@
#include <media/mt9v032.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-of.h>
#include <media/v4l2-subdev.h>
/* The first four rows are black rows. The active area spans 753x481 pixels. */
@@ -876,10 +879,59 @@ static const struct regmap_config mt9v032_regmap_config = {
* Driver initialization and probing
*/
+static struct mt9v032_platform_data *
+mt9v032_get_pdata(struct i2c_client *client)
+{
+ struct mt9v032_platform_data *pdata;
+ struct v4l2_of_endpoint endpoint;
+ struct device_node *np;
+ struct property *prop;
+
+ if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
+ return client->dev.platform_data;
+
+ np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+ if (!np)
+ return NULL;
+
+ if (v4l2_of_parse_endpoint(np, &endpoint) < 0)
+ goto done;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ goto done;
+
+ prop = of_find_property(np, "link-freqs", NULL);
+ if (prop) {
+ size_t size = prop->length / 8;
+ u64 *link_freqs;
+
+ link_freqs = devm_kzalloc(&client->dev,
+ size * sizeof(*link_freqs),
+ GFP_KERNEL);
+ if (!link_freqs)
+ goto done;
+
+ if (of_property_read_u64_array(np, "link-frequencies",
+ link_freqs, size) < 0)
+ goto done;
+
+ pdata->link_freqs = link_freqs;
+ pdata->link_def_freq = link_freqs[0];
+ }
+
+ pdata->clk_pol = !!(endpoint.bus.parallel.flags &
+ V4L2_MBUS_PCLK_SAMPLE_RISING);
+
+done:
+ of_node_put(np);
+ return pdata;
+}
+
static int mt9v032_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
- struct mt9v032_platform_data *pdata = client->dev.platform_data;
+ struct mt9v032_platform_data *pdata = mt9v032_get_pdata(client);
struct mt9v032 *mt9v032;
unsigned int i;
int ret;
@@ -1034,9 +1086,21 @@ static const struct i2c_device_id mt9v032_id[] = {
};
MODULE_DEVICE_TABLE(i2c, mt9v032_id);
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id mt9v032_of_match[] = {
+ { .compatible = "mt9v032" },
+ { .compatible = "mt9v032m" },
+ { .compatible = "mt9v034" },
+ { .compatible = "mt9v034m" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mt9v032_of_match);
+#endif
+
static struct i2c_driver mt9v032_driver = {
.driver = {
.name = "mt9v032",
+ .of_match_table = of_match_ptr(mt9v032_of_match),
},
.probe = mt9v032_probe,
.remove = mt9v032_remove,
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
