From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Add pinctrl nodes for the r_i2c node. Without the pinmux defined the
r_i2c bus may fail to work, possibly if the bootloader uses rsb mode
for the PMIC.
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
index 921d5f61d8d6..e31945c3895e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -837,6 +837,8 @@ r_i2c: i2c@7081400 {
dmas = <&dma 48>, <&dma 48>;
dma-names = "rx", "tx";
resets = <&r_ccu RST_R_APB2_I2C>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
