Introduce a GPIO mux mode macro for easier readability. All K3 devices use mux mode 7 to switch to GPIO mux. Signed-off-by: Nishanth Menon <nm@xxxxxx> --- arch/arm64/boot/dts/ti/k3-pinctrl.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h index 4cd2df467d0b..b1a0415e6611 100644 --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -38,6 +38,8 @@ #define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT) +#define PIN_GPIO_MUX_MODE (7) + #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) -- 2.43.0
