[PATCH net-next v5 02/12] net: dsa: lantiq_gswip: Only allow phy-mode = "internal" on the CPU port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>

Add the CPU port to gswip_xrx200_phylink_get_caps() and
gswip_xrx300_phylink_get_caps(). It connects through a SoC-internal bus,
so the only allowed phy-mode is PHY_INTERFACE_MODE_INTERNAL.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Reviewed-by: Vladimir Oltean <olteanv@xxxxxxxxx>
Acked-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
---
 drivers/net/dsa/lantiq_gswip.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index a557049e34f5..b9c7076ce32f 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1516,6 +1516,7 @@ static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
 	case 2:
 	case 3:
 	case 4:
+	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
 		break;
@@ -1547,6 +1548,7 @@ static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
 	case 2:
 	case 3:
 	case 4:
+	case 6:
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
 		break;
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux