On Tue, Jun 11, 2024 at 01:40:15PM +0200, Martin Schiller wrote: > Convert the lantiq,gswip bindings to YAML format. > > Also add this new file to the MAINTAINERS file. > > Signed-off-by: Martin Schiller <ms@xxxxxxxxxx> > --- > .../bindings/net/dsa/lantiq,gswip.yaml | 195 ++++++++++++++++++ > .../bindings/net/dsa/lantiq-gswip.txt | 146 ------------- > MAINTAINERS | 1 + > 3 files changed, 196 insertions(+), 146 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml > delete mode 100644 Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt > > diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml > new file mode 100644 > index 000000000000..14ef48d6a0ee > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml > @@ -0,0 +1,195 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Lantiq GSWIP Ethernet switches > + > +allOf: > + - $ref: dsa.yaml#/$defs/ethernet-ports > + > +maintainers: > + - Hauke Mehrtens <hauke@xxxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - lantiq,xrx200-gswip > + - lantiq,xrx300-gswip > + - lantiq,xrx330-gswip > + > + reg: > + minItems: 3 > + maxItems: 3 blank line > + reg-names: > + items: > + - const: switch > + - const: mdio > + - const: mii > + > + mdio: > + $ref: /schemas/net/mdio.yaml# > + unevaluatedProperties: false > + > + properties: > + compatible: > + const: lantiq,xrx200-mdio > + > + required: > + - compatible > + > + gphy-fw: > + type: object > + properties: > + '#address-cells': > + const: 1 blank line > + '#size-cells': > + const: 0 > + > + compatible: > + allOf: Don't need allOf. > + - items: > + - enum: > + - lantiq,xrx200-gphy-fw > + - lantiq,xrx300-gphy-fw > + - lantiq,xrx330-gphy-fw > + - const: lantiq,gphy-fw > + > + lantiq,rcu: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: phandle to the RCU syscon > + > + patternProperties: > + "^gphy@[0-9a-f]+$": "^gphy@[0-9a-f]{1,2]$" > + type: object > + > + properties: > + reg: > + minimum: 0 > + maximum: 255 > + description: > + Offset of the GPHY firmware register in the RCU register range > + > + resets: > + items: > + - description: GPHY reset line > + > + reset-names: > + items: > + - const: gphy > + > + required: > + - reg > + > + additionalProperties: false For indented cases, it is preferred to put this before 'properties'. > + > + required: > + - compatible > + - lantiq,rcu > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + > +unevaluatedProperties: false > + > +examples: > + - | > + switch@e108000 { > + compatible = "lantiq,xrx200-gswip"; > + reg = <0xe108000 0x3100>, /* switch */ > + <0xe10b100 0xd8>, /* mdio */ > + <0xe10b1d8 0x130>; /* mii */ > + dsa,member = <0 0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + label = "lan3"; > + phy-mode = "rgmii"; > + phy-handle = <&phy0>; > + }; > + > + port@1 { > + reg = <1>; > + label = "lan4"; > + phy-mode = "rgmii"; > + phy-handle = <&phy1>; > + }; > + > + port@2 { > + reg = <2>; > + label = "lan2"; > + phy-mode = "internal"; > + phy-handle = <&phy11>; > + }; > + > + port@4 { > + reg = <4>; > + label = "lan1"; > + phy-mode = "internal"; > + phy-handle = <&phy13>; > + }; > + > + port@5 { > + reg = <5>; > + label = "wan"; > + phy-mode = "rgmii"; > + phy-handle = <&phy5>; > + }; > + > + port@6 { > + reg = <0x6>; > + ethernet = <ð0>; > + }; > + }; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "lantiq,xrx200-mdio"; > + > + phy0: ethernet-phy@0 { > + reg = <0x0>; > + }; > + phy1: ethernet-phy@1 { > + reg = <0x1>; > + }; > + phy5: ethernet-phy@5 { > + reg = <0x5>; > + }; > + phy11: ethernet-phy@11 { > + reg = <0x11>; > + }; > + phy13: ethernet-phy@13 { > + reg = <0x13>; > + }; > + }; > + > + gphy-fw { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"; > + lantiq,rcu = <&rcu0>; > + > + gphy@20 { > + reg = <0x20>; > + > + resets = <&reset0 31 30>; > + reset-names = "gphy"; > + }; > + > + gphy@68 { > + reg = <0x68>; > + > + resets = <&reset0 29 28>; > + reset-names = "gphy"; > + }; > + }; > + };
