The PCIe0 instance of PCIe on TI's J722S SoC is a Gen3 single lane PCIe
controller. Add the device-tree nodes for it and enable it in Root Complex
mode of operation using Lane 0 of the Serdes1 instance of Serdes.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
Current patch is v1. No changelog.
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 17 +++++++++++
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 37 +++++++++++++++++++++++
2 files changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 16c6ab8ee07e..d2d7de5cfe27 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -416,6 +416,16 @@ serdes0_usb_link: phy@0 {
};
};
+&serdes1 {
+ serdes1_pcie_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz1 1>;
+ };
+};
+
&usbss0 {
ti,vbus-divider;
status = "okay";
@@ -439,3 +449,10 @@ &usb1 {
phys = <&serdes0_usb_link>;
phy-names = "cdns3,usb3-phy";
};
+
+&pcie0_rc {
+ status = "okay";
+ reset-gpios = <&exp1 18 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes1_pcie_link>;
+ phy-names = "pcie-phy";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 19a7e8413ad2..0b32893eb75e 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -4,6 +4,7 @@
* Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
*/
+#include <dt-bindings/phy/phy-cadence.h>
#include <dt-bindings/phy/phy-ti.h>
/*
@@ -96,6 +97,35 @@ serdes1: serdes@f010000 {
};
};
+ pcie0_rc: pcie@f102000 {
+ compatible = "ti,j722s-pcie-host", "ti,j721e-pcie-host";
+ reg = <0x00 0x0f102000 0x00 0x1000>,
+ <0x00 0x0f100000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x68000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ ranges = <0x01000000 0x00 0x68001000 0x00 0x68001000 0x00 0x0010000>,
+ <0x02000000 0x00 0x68011000 0x00 0x68011000 0x00 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 99 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ max-link-speed = <3>;
+ num-lanes = <1>;
+ power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 259 0>, <&serdes1 CDNS_TORRENT_REFCLK_DRIVER>;
+ clock-names = "fck", "pcie_refclk";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb010>;
+ cdns,no-bar-match-nbits = <64>;
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x0>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ status = "disabled";
+ };
+
usbss1: usb@f920000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x0f920000 0x00 0x100>;
@@ -138,3 +168,10 @@ serdes_ln_ctrl: mux-controller@4080 {
<0x10 0x3>; /* SERDES1 lane0 select */
};
};
+
+&wkup_conf {
+ pcie0_ctrl: pcie0-ctrl@4070 {
+ compatible = "ti,j784s4-pcie-ctrl", "syscon";
+ reg = <0x4070 0x4>;
+ };
+};
--
2.40.1
