From: Ravi Gunasekaran <r-gunasekaran@xxxxxx> USB1 controller on J722S and AM62P are from different vendors. Redefine the USB1 node description for J722S by deleting the node inherited from AM62P dtsi. Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx> Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> --- v2: https://lore.kernel.org/r/20240513114443.16350-3-r-gunasekaran@xxxxxx/ No changes since v2. v1: https://lore.kernel.org/r/20240429120932.11456-3-r-gunasekaran@xxxxxx/ Changes since v1: - The entire node which was added in k3-j722s.dtsi in v1 in now moved to k3-j722s-main.dtsi as USB is a main domain peripheral. - Used generic node names - renamed "cdns-usb@f920000" to "usb@f920000". arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 39 +++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi index 0dac8f1e1291..b069cecebfd9 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi @@ -6,6 +6,13 @@ #include <dt-bindings/phy/phy-ti.h> +/* + * USB1 controller on AM62P and J722S are of different IP. + * Delete AM62P's USBSS1 node definition and redefine it for J722S. + */ + +/delete-node/ &usbss1; + / { serdes_refclk: clk-0 { compatible = "fixed-clock"; @@ -52,6 +59,38 @@ serdes0: serdes@f000000 { status = "disabled"; /* Needs lane config */ }; }; + + usbss1: usb@f920000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x0f920000 0x00 0x100>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 278 3>, <&k3_clks 278 1>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb1: usb@31200000{ + compatible = "cdns,usb3"; + reg = <0x00 0x31200000 0x00 0x10000>, + <0x00 0x31210000 0x00 0x10000>, + <0x00 0x31220000 0x00 0x10000>; + reg-names = "otg", + "xhci", + "dev"; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; }; &main_conf { -- 2.40.1
