[RFC PATCH v3 3/7] pinctrl: starfive: jh8100: add sys_west domain sub-driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add sys_west domain sub-driver.

Signed-off-by: Alex Soo <yuklin.soo@xxxxxxxxxxxxxxxx>
---
 drivers/pinctrl/starfive/Kconfig              |  12 ++
 drivers/pinctrl/starfive/Makefile             |   1 +
 .../pinctrl-starfive-jh8100-sys-west.c        | 164 ++++++++++++++++++
 .../starfive/pinctrl-starfive-jh8100.c        |   6 +
 .../starfive/pinctrl-starfive-jh8100.h        |   5 +
 5 files changed, 188 insertions(+)
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-west.c

diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
index afcbf9d4dc8d..d78f161a636c 100644
--- a/drivers/pinctrl/starfive/Kconfig
+++ b/drivers/pinctrl/starfive/Kconfig
@@ -70,3 +70,15 @@ config PINCTRL_STARFIVE_JH8100_SYS_EAST
 	  This also provides an interface to the GPIO pins not used by other
 	  peripherals supporting inputs, outputs, configuring pull-up/pull-down
 	  and interrupts on input changes.
+
+config PINCTRL_STARFIVE_JH8100_SYS_WEST
+	tristate "StarFive JH8100 SoC System IOMUX-West pinctrl and GPIO driver"
+	depends on ARCH_STARFIVE  || COMPILE_TEST
+	depends on OF
+	select PINCTRL_STARFIVE_JH8100
+	default ARCH_STARFIVE
+	help
+	  Say yes here to support system iomux-west pin control on the StarFive JH8100 SoC.
+	  This also provides an interface to the GPIO pins not used by other
+	  peripherals supporting inputs, outputs, configuring pull-up/pull-down
+	  and interrupts on input changes.
diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile
index 45698c502b48..784465157ae2 100644
--- a/drivers/pinctrl/starfive/Makefile
+++ b/drivers/pinctrl/starfive/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_PINCTRL_STARFIVE_JH7110_AON)	+= pinctrl-starfive-jh7110-aon.o
 
 obj-$(CONFIG_PINCTRL_STARFIVE_JH8100)		+= pinctrl-starfive-jh8100.o
 obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_EAST)	+= pinctrl-starfive-jh8100-sys-east.o
+obj-$(CONFIG_PINCTRL_STARFIVE_JH8100_SYS_WEST)	+= pinctrl-starfive-jh8100-sys-west.o
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-west.c b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-west.c
new file mode 100644
index 000000000000..b97d89777aa3
--- /dev/null
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100-sys-west.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Pinctrl / GPIO driver for StarFive JH8100 SoC sys west controller
+ *
+ * Copyright (C) 2023-2024 StarFive Technology Co., Ltd.
+ * Author: Alex Soo <yuklin.soo@xxxxxxxxxxxxxxxx>
+ *
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <dt-bindings/pinctrl/starfive,jh8100-pinctrl.h>
+
+#include "pinctrl-starfive-jh8100.h"
+
+#define JH8100_SYS_W_GC_BASE			0
+
+/* registers */
+#define JH8100_SYS_W_DOEN			0x000
+#define JH8100_SYS_W_DOUT			0x010
+#define JH8100_SYS_W_GPI			0x020
+#define JH8100_SYS_W_GPIOIN			0x068
+
+#define JH8100_SYS_W_GPIOEN			0x048
+#define JH8100_SYS_W_GPIOIS0			0x04c
+#define JH8100_SYS_W_GPIOIC0			0x050
+#define JH8100_SYS_W_GPIOIBE0			0x054
+#define JH8100_SYS_W_GPIOIEV0			0x058
+#define JH8100_SYS_W_GPIOIE0			0x05c
+#define JH8100_SYS_W_GPIORIS0			0x060
+#define JH8100_SYS_W_GPIOMIS0			0x064
+
+static const struct pinctrl_pin_desc jh8100_sys_w_pins[] = {
+	PINCTRL_PIN(0,	"SYS_W_GPIO0"),
+	PINCTRL_PIN(1,	"SYS_W_GPIO1"),
+	PINCTRL_PIN(2,	"SYS_W_GPIO2"),
+	PINCTRL_PIN(3,	"SYS_W_GPIO3"),
+	PINCTRL_PIN(4,	"SYS_W_GPIO4"),
+	PINCTRL_PIN(5,	"SYS_W_GPIO5"),
+	PINCTRL_PIN(6,	"SYS_W_GPIO6"),
+	PINCTRL_PIN(7,	"SYS_W_GPIO7"),
+	PINCTRL_PIN(8,	"SYS_W_GPIO8"),
+	PINCTRL_PIN(9,	"SYS_W_GPIO9"),
+	PINCTRL_PIN(10,	"SYS_W_GPIO10"),
+	PINCTRL_PIN(11,	"SYS_W_GPIO11"),
+	PINCTRL_PIN(12,	"SYS_W_GPIO12"),
+	PINCTRL_PIN(13,	"SYS_W_GPIO13"),
+	PINCTRL_PIN(14,	"SYS_W_GPIO14"),
+	PINCTRL_PIN(15,	"SYS_W_GPIO15"),
+};
+
+static const struct jh8100_gpio_func_sel
+	jh8100_sys_w_func_sel[ARRAY_SIZE(jh8100_sys_w_pins)] = {
+	[0]    = { 0xb4,  0, 2 },
+	[1]    = { 0xb4, 12, 2 },
+	[2]    = { 0xb4, 14, 2 },
+	[3]    = { 0xb4, 16, 2 },
+	[4]    = { 0xb4, 18, 2 },
+	[5]    = { 0xb4, 20, 2 },
+	[6]    = { 0xb4, 22, 2 },
+	[7]    = { 0xb4, 24, 2 },
+	[8]    = { 0xb4, 26, 2 },
+	[9]    = { 0xb4, 28, 2 },
+	[10]   = { 0xb4,  2, 2 },
+	[11]   = { 0xb4,  4, 2 },
+	[12]   = { 0xb4,  6, 2 },
+	[13]   = { 0xb4,  8, 2 },
+	[14]   = { 0xb4, 10, 2 },
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int jh8100_sys_w_pinctrl_suspend(struct device *dev)
+{
+	struct jh8100_pinctrl *sfp;
+	int i;
+
+	sfp = dev_get_drvdata(dev);
+	if (!sfp)
+		return -EINVAL;
+
+	for (i = 0; i < sfp->info->nregs; i++)
+		sfp->jh8100_sys_west_regs[i] = readl_relaxed(sfp->base + (i * 4));
+
+	return pinctrl_force_sleep(sfp->pctl);
+}
+
+static int jh8100_sys_w_pinctrl_resume(struct device *dev)
+{
+	struct jh8100_pinctrl *sfp;
+	int i;
+
+	sfp = dev_get_drvdata(dev);
+	if (!sfp)
+		return -EINVAL;
+
+	for (i = 0; i < sfp->info->nregs; i++)
+		writel_relaxed(sfp->jh8100_sys_west_regs[i], sfp->base + (i * 4));
+
+	return pinctrl_force_default(sfp->pctl);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(jh8100_sys_w_pinctrl_dev_pm_ops,
+			 jh8100_sys_w_pinctrl_suspend,
+			 jh8100_sys_w_pinctrl_resume);
+
+static const struct jh8100_gpio_irq_reg jh8100_sys_w_irq_reg = {
+	.is_reg_base	= JH8100_SYS_W_GPIOIS0,
+	.ic_reg_base	= JH8100_SYS_W_GPIOIC0,
+	.ibe_reg_base	= JH8100_SYS_W_GPIOIBE0,
+	.iev_reg_base	= JH8100_SYS_W_GPIOIEV0,
+	.ie_reg_base	= JH8100_SYS_W_GPIOIE0,
+	.ris_reg_base	= JH8100_SYS_W_GPIORIS0,
+	.mis_reg_base	= JH8100_SYS_W_GPIOMIS0,
+	.ien_reg_base	= JH8100_SYS_W_GPIOEN,
+};
+
+static const struct jh8100_pinctrl_domain_info jh8100_sys_w_pinctrl_info = {
+	.pins				= jh8100_sys_w_pins,
+	.npins				= ARRAY_SIZE(jh8100_sys_w_pins),
+	.ngpios				= JH8100_SYS_W_NGPIO,
+	.gc_base			= JH8100_SYS_W_GC_BASE,
+	.name				= JH8100_SYS_W_DOMAIN_NAME,
+	.nregs				= JH8100_SYS_W_REG_NUM,
+	.dout_reg_base			= JH8100_SYS_W_DOUT,
+	.dout_mask			= GENMASK(5, 0),
+	.doen_reg_base			= JH8100_SYS_W_DOEN,
+	.doen_mask			= GENMASK(4, 0),
+	.gpi_reg_base			= JH8100_SYS_W_GPI,
+	.gpi_mask			= GENMASK(4, 0),
+	.gpioin_reg_base		= JH8100_SYS_W_GPIOIN,
+	.func_sel			= jh8100_sys_w_func_sel,
+	.irq_reg			= &jh8100_sys_w_irq_reg,
+	.mis_pin_num			= JH8100_SYS_W_NGPIO,
+};
+
+static const struct of_device_id jh8100_sys_w_pinctrl_of_match[] = {
+	{
+		.compatible = "starfive,jh8100-sys-pinctrl-west",
+		.data = &jh8100_sys_w_pinctrl_info,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh8100_sys_w_pinctrl_of_match);
+
+static struct platform_driver jh8100_sys_w_pinctrl_driver = {
+	.probe = jh8100_pinctrl_probe,
+	.driver = {
+		.name = "starfive-jh8100-sys-pinctrl-west",
+#ifdef CONFIG_PM_SLEEP
+		.pm = &jh8100_sys_w_pinctrl_dev_pm_ops,
+#endif
+		.of_match_table = jh8100_sys_w_pinctrl_of_match,
+	},
+};
+module_platform_driver(jh8100_sys_w_pinctrl_driver);
+
+MODULE_DESCRIPTION("Pinctrl driver for StarFive JH8100 SoC sys west controller");
+MODULE_AUTHOR("Alex Soo <yuklin.soo@xxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.c b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.c
index 4b68463ff5a5..8c3e4a90d68d 100644
--- a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.c
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.c
@@ -333,6 +333,9 @@ static int jh8100_set_one_pin_mux(struct jh8100_pinctrl *sfp,
 	if (!strcmp(sfp->info->name, JH8100_SYS_E_DOMAIN_NAME) &&
 	    pin < sfp->gc.ngpio && func == 1)
 		jh8100_set_function(sfp, pin, func);
+	else if (!strcmp(sfp->info->name, JH8100_SYS_W_DOMAIN_NAME) &&
+		 pin < sfp->gc.ngpio - 1 && func == 2)
+		jh8100_set_function(sfp, pin, func);
 
 	return 0;
 }
@@ -410,6 +413,9 @@ static int jh8100_get_padcfg_base(struct jh8100_pinctrl *sfp,
 	if (!strcmp(sfp->info->name, JH8100_SYS_E_DOMAIN_NAME)) {
 		if (pin < JH8100_SYS_E_NGPIO)
 			return JH8100_SYS_E_GPO_PDA_00_47_CFG;
+	} else if (!strcmp(sfp->info->name, JH8100_SYS_W_DOMAIN_NAME)) {
+		if (pin < JH8100_SYS_W_NGPIO)
+			return JH8100_SYS_W_GPO_PDA_00_15_CFG;
 	}
 
 	return -ENXIO;
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
index 6eb4f1896a90..7c7a05c1c828 100644
--- a/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
+++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh8100.h
@@ -12,12 +12,16 @@
 
 #include "../core.h"
 
+#define JH8100_SYS_W_DOMAIN_NAME	"jh8100-sys-west"
 #define JH8100_SYS_E_DOMAIN_NAME	"jh8100-sys-east"
 
+#define JH8100_SYS_W_NGPIO		16
 #define JH8100_SYS_E_NGPIO		48
 
+#define JH8100_SYS_W_REG_NUM		44
 #define JH8100_SYS_E_REG_NUM		116
 
+#define JH8100_SYS_W_GPO_PDA_00_15_CFG	0x074
 #define JH8100_SYS_E_GPO_PDA_00_47_CFG	0x114
 
 struct jh8100_pinctrl {
@@ -30,6 +34,7 @@ struct jh8100_pinctrl {
 	/* register read/write mutex */
 	struct mutex mutex;
 	const struct jh8100_pinctrl_domain_info *info;
+	unsigned int jh8100_sys_west_regs[JH8100_SYS_W_REG_NUM];
 	unsigned int jh8100_sys_east_regs[JH8100_SYS_E_REG_NUM];
 	/* wakeup */
 	struct irq_domain *irq_domain;
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux