Re: [PATCH 0/2] Set PHY address of MT7531 switch to 0x1f on MediaTek arm64 boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23.04.2024 12:16, Arınç ÜNAL wrote:
On 08/04/2024 10:22, Arınç ÜNAL wrote:
On 31.03.2024 12:28, arinc.unal@xxxxxxxxxx wrote:
On 14.03.2024 15:20, Arınç ÜNAL via B4 Relay wrote:
Hello.

This is a small patch series setting the PHY address of MT7531 to 0x1f on
all boards that have the switch.

Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
Arınç ÜNAL (2):
       arm64: dts: mediatek: mt7622: set PHY address of MT7531 switch to 0x1f
       arm64: dts: mediatek: mt7986: set PHY address of MT7531 switch to 0x1f

  arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
  arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             | 4 ++--
  arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++--
  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts             | 4 ++--
  arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts             | 4 ++--
  5 files changed, 10 insertions(+), 10 deletions(-)
---
base-commit: ba90af39ba57b3fe3ecfdba0c87a80d20c7b788d
change-id: 20240314-for-mediatek-mt7531-phy-address-9d0b4cfeca21

Best regards,

Reminder that this patch series is waiting.

Another reminder that this patch series is waiting to be applied.

Here's the third reminder for someone to apply this. From now on, I am
going to reply to this thread once every day until this patch series is
applied.

Fourth.

Arınç




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux