[PATCH 0/2] Set PHY address of MT7531 switch to 0x1f on MediaTek arm64 boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

This is a small patch series setting the PHY address of MT7531 to 0x1f on
all boards that have the switch.

Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
Arınç ÜNAL (2):
      arm64: dts: mediatek: mt7622: set PHY address of MT7531 switch to 0x1f
      arm64: dts: mediatek: mt7986: set PHY address of MT7531 switch to 0x1f

 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts             | 4 ++--
 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++--
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts             | 4 ++--
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts             | 4 ++--
 5 files changed, 10 insertions(+), 10 deletions(-)
---
base-commit: ba90af39ba57b3fe3ecfdba0c87a80d20c7b788d
change-id: 20240314-for-mediatek-mt7531-phy-address-9d0b4cfeca21

Best regards,
-- 
Arınç ÜNAL <arinc.unal@xxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux