This series adds support for setting the TX_CLK direction in the eQOS ethernet core on the i.MX93 when RMII mode is used. According to AN14149, when the i.MX93 ethernet controller is used in RMII mode, the TX_CLK *must* be set to output mode. Add a devicetree property with the register to set this bit and parse it in the dwmac-imx driver. Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx> --- Steffen Trumtrar (3): dt-bindings: net: mx93: add enet_clk_sel binding arm64: dts: imx93: add enet_clk_sel net: stmicro: imx: set TX_CLK direction in RMII mode .../devicetree/bindings/net/nxp,dwmac-imx.yaml | 10 ++++++++ arch/arm64/boot/dts/freescale/imx93.dtsi | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c | 27 ++++++++++++++++++++++ 3 files changed, 38 insertions(+) --- base-commit: 4cece764965020c22cff7665b18a012006359095 change-id: 20240422-v6-9-topic-imx93-eqos-rmii-3a2cb421c81d Best regards, -- Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>