On 16/04/2024 08:35, Mohammad Rafi Shaik wrote: > From: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx> > > Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC > connected over SoundWire. This device has two SoundWire device RX and > TX respectively, supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH, > 6 DMICs, MBHC. > > Co-developed-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx> > Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx> > Signed-off-by: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx> > --- > .../bindings/sound/qcom,wcd937x.yaml | 119 ++++++++++++++++++ > 1 file changed, 119 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml > > diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml > new file mode 100644 > index 000000000000..b45f823af04f > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml No wildcards. This is wcd9370, right? > @@ -0,0 +1,119 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm WCD9370 Audio Codec > + > +maintainers: > + - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > + > +description: | Do not need '|' unless you need to preserve formatting. > + Qualcomm WCD9370 Codec is a standalone Hi-Fi audio codec IC. > + It has RX and TX Soundwire slave devices. > + > +properties: > + compatible: > + enum: > + - qcom,wcd9370-codec Can it be anything else than codec? > + > + reset-gpios: > + description: GPIO spec for reset line to use > + maxItems: 1 > + > + vdd-buck-supply: > + description: A reference to the 1.8V buck supply > + > + vdd-rxtx-supply: > + description: A reference to the 1.8V rx supply > + > + vdd-px-supply: > + description: A reference to the 1.8V I/O supply > + > + vdd-mic-bias-supply: > + description: A reference to the 3.8V mic bias supply > + > + qcom,tx-device: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: A reference to Soundwire tx device phandle "A reference to phandle" is not correct. Phandle is the reference. Anyway, both are redundant. > > + qcom,rx-device: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: A reference to Soundwire rx device phandle > + > + qcom,micbias1-microvolt: > + description: micbias1 voltage > + minimum: 1800000 > + maximum: 2850000 > + > + qcom,micbias2-microvolt: > + description: micbias2 voltage > + minimum: 1800000 > + maximum: 2850000 > + > + qcom,micbias3-microvolt: > + description: micbias3 voltage > + minimum: 1800000 > + maximum: 2850000 > + > + '#sound-dai-cells': > + const: 1 > + > +required: > + - compatible > + - reset-gpios > + - qcom,tx-device > + - qcom,rx-device > + - qcom,micbias1-microvolt > + - qcom,micbias2-microvolt > + - qcom,micbias3-microvolt > + - "#sound-dai-cells" > + > +unevaluatedProperties: false This does not make sense without ref to dai-common, so this should point you to missing ref. > + > +examples: > + - | > + codec { > + compatible = "qcom,wcd9370-codec"; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&wcd_reset_n>; > + pinctrl-1 = <&wcd_reset_n_sleep>; > + reset-gpios = <&tlmm 83 0>; > + vdd-buck-supply = <&vreg_l17b_1p8>; > + vdd-rxtx-supply = <&vreg_l18b_1p8>; > + vdd-px-supply = <&vreg_l18b_1p8>; > + vdd-mic-bias-supply = <&vreg_bob>; > + qcom,micbias1-microvolt = <1800000>; > + qcom,micbias2-microvolt = <1800000>; > + qcom,micbias3-microvolt = <1800000>; > + qcom,rx-device = <&wcd937x_rx>; > + qcom,tx-device = <&wcd937x_tx>; > + #sound-dai-cells = <1>; > + }; > + > + /* ... */ > + > + soundwire@3210000 { > + #address-cells = <2>; Drop this and other nodes. Best regards, Krzysztof