Add support for the PCIe on IPQ9574. The main difference from ipq6018 is that the "iface" clock is not necessarry. Add a special case in qcom_pcie_get_resources_2_9_0() to handle this. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx> --- drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 14772edcf0d3..10560d6d6336 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1101,15 +1101,19 @@ static int qcom_pcie_get_resources_2_9_0(struct qcom_pcie *pcie) struct qcom_pcie_resources_2_9_0 *res = &pcie->res.v2_9_0; struct dw_pcie *pci = pcie->pci; struct device *dev = pci->dev; - int ret; + int ret, num_clks = ARRAY_SIZE(res->clks) - 1; - res->clks[0].id = "iface"; + res->clks[0].id = "rchng"; res->clks[1].id = "axi_m"; res->clks[2].id = "axi_s"; res->clks[3].id = "axi_bridge"; - res->clks[4].id = "rchng"; - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); + if (!of_device_is_compatible(dev->of_node, "qcom,pcie-ipq9574")) { + res->clks[4].id = "iface"; + num_clks++; + } + + ret = devm_clk_bulk_get(dev, num_clks, res->clks); if (ret < 0) return ret; @@ -1664,6 +1668,7 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, + { .compatible = "qcom,pcie-ipq9574", .data = &cfg_2_9_0 }, { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, { .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp }, -- 2.40.1