On Fri, Mar 29, 2024 at 11:50:30PM +0000, Andre Przywara wrote:
> The X-Powers AXP717 PMIC has separate input supply pins for each group
> of LDOs, so they are not all using the same DCDC1 input, as described
> currently.
>
> Replace the "supply" member of each LDO description with the respective
> group supply name, so that the supply dependencies can be correctly
> described in the devicetree.
> Also fix two off-by-ones in the regulator macros, after some double
> checking the numbers against the datasheet.
>
> Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
Hi,
> ---
> drivers/regulator/axp20x-regulator.c | 28 ++++++++++++++--------------
> 1 file changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
> index 34fcdd82b2eaa..3907606b091f6 100644
> --- a/drivers/regulator/axp20x-regulator.c
> +++ b/drivers/regulator/axp20x-regulator.c
> @@ -140,7 +140,7 @@
>
> #define AXP717_DCDC1_NUM_VOLTAGES 88
> #define AXP717_DCDC2_NUM_VOLTAGES 107
> -#define AXP717_DCDC3_NUM_VOLTAGES 104
> +#define AXP717_DCDC3_NUM_VOLTAGES 103
> #define AXP717_DCDC_V_OUT_MASK GENMASK(6, 0)
> #define AXP717_LDO_V_OUT_MASK GENMASK(4, 0)
>
> @@ -766,7 +766,7 @@ static const struct linear_range axp717_dcdc1_ranges[] = {
> static const struct linear_range axp717_dcdc2_ranges[] = {
> REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
> REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
> - REGULATOR_LINEAR_RANGE(1600000, 88, 107, 100000),
> + REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
> };
I'm not entirely sure these are correct after reading the datasheet.
>From what I can tell REGULATOR_LINEAR_RANGE is inclusive, so for DCDC1
we have these ranges (we agree DCDC1 is correct, it is not affected by
this patch):
#define AXP717_DCDC1_NUM_VOLTAGES 88
static const struct linear_range axp717_dcdc1_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
};
The datasheet says this for the register:
0.5~1.2V,10mV/step,71steps
1.22~1.54V,20mV/step,17steps
0000000: 0.50V
0000001: 0.51V
...
1000110: 1.20V
1000111: 1.22V
1001000: 1.24V
...
1010111: 1.54V
1011000~1111111: Reserve
Converting to decimal:
0: 0.50V (range 1 start)
1: 0.51V
...
70: 1.20V (range 1 end)
71: 1.22V (range 2 start)
72: 1.24V
...
87: 1.54V (range 2 end)
88 onwards: reserved
The maximum voltages are the last value plus one (to include voltage zero).
For DCDC2 after applying this patch we get:
#define AXP717_DCDC2_NUM_VOLTAGES 107
static const struct linear_range axp717_dcdc2_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
};
The datasheet marks the maximum value as 1101011: 3.40V, so 106 (the old
value for range) seems correct, but the NUM_VOLTAGES seems like it
should be bumped up to 108. I think you fixed the wrong thing here.
#define AXP717_DCDC3_NUM_VOLTAGES 103
static const struct linear_range axp717_dcdc2_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
};
The datasheet marks the maximum value as 1101011: 3.40V, so 106 (the old
value for range) seems correct, but the NUM_VOLTAGES seems like it
should be bumped up to 108. I think you fixed the wrong thing here.
For DCDC3 after applying this patch we get:
#define AXP717_DCDC3_NUM_VOLTAGES 103
static const struct linear_range axp717_dcdc3_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
REGULATOR_LINEAR_RANGE(1220000, 71, 102, 20000),
};
The datasheet marks the maximum value as 1100110: 1.84V, which is 102.
So this patch to correct the AXP717_DCDC3_NUM_VOLTAGES is correct here.
John.
>
> static const struct linear_range axp717_dcdc3_ranges[] = {
> @@ -790,40 +790,40 @@ static const struct regulator_desc axp717_regulators[] = {
> AXP_DESC(AXP717, DCDC4, "dcdc4", "vin4", 1000, 3700, 100,
> AXP717_DCDC4_CONTROL, AXP717_DCDC_V_OUT_MASK,
> AXP717_DCDC_OUTPUT_CONTROL, BIT(3)),
> - AXP_DESC(AXP717, ALDO1, "aldo1", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO1, "aldo1", "aldoin", 500, 3500, 100,
> AXP717_ALDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(0)),
> - AXP_DESC(AXP717, ALDO2, "aldo2", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO2, "aldo2", "aldoin", 500, 3500, 100,
> AXP717_ALDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(1)),
> - AXP_DESC(AXP717, ALDO3, "aldo3", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO3, "aldo3", "aldoin", 500, 3500, 100,
> AXP717_ALDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(2)),
> - AXP_DESC(AXP717, ALDO4, "aldo4", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO4, "aldo4", "aldoin", 500, 3500, 100,
> AXP717_ALDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(3)),
> - AXP_DESC(AXP717, BLDO1, "bldo1", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO1, "bldo1", "bldoin", 500, 3500, 100,
> AXP717_BLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(4)),
> - AXP_DESC(AXP717, BLDO2, "bldo2", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO2, "bldo2", "bldoin", 500, 3500, 100,
> AXP717_BLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(5)),
> - AXP_DESC(AXP717, BLDO3, "bldo3", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO3, "bldo3", "bldoin", 500, 3500, 100,
> AXP717_BLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(6)),
> - AXP_DESC(AXP717, BLDO4, "bldo4", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO4, "bldo4", "bldoin", 500, 3500, 100,
> AXP717_BLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(7)),
> - AXP_DESC(AXP717, CLDO1, "cldo1", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO1, "cldo1", "cldoin", 500, 3500, 100,
> AXP717_CLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(0)),
> - AXP_DESC(AXP717, CLDO2, "cldo2", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO2, "cldo2", "cldoin", 500, 3500, 100,
> AXP717_CLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(1)),
> - AXP_DESC(AXP717, CLDO3, "cldo3", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO3, "cldo3", "cldoin", 500, 3500, 100,
> AXP717_CLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(2)),
> - AXP_DESC(AXP717, CLDO4, "cldo4", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO4, "cldo4", "cldoin", 500, 3500, 100,
> AXP717_CLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(3)),
> AXP_DESC(AXP717, CPUSLDO, "cpusldo", "vin1", 500, 1400, 50,
> --
> 2.35.8
>
