Here are some fixes to the AXP717 PMIC support series. Lee put that in an immutable branch already, so these here go on top. Patch 1 contains fixes to the regulator descriptions: the LDOs had the wrong supply source, and two numbers were wrong. The datasheet describes the voltage ranges and register values differently from what our macros expect, in a way that literally begs for off-by-ones, so here you go. I don't know if that's still feasible, but it would be a good candidate to squash into the patch that it fixes. The other three patches add the "boost" regulator, which is meant to provide the 5V USB VBUS power when operating from the battery. It's the usual trinity of binding/mfd/regulator patches. Again this could be squashed into the respective patches from the original series, if people agree. Please have a look and test on a device, since I could not do this. Based on mfd/ib-mfd-regulator-6.10, as detailed below. Cheers, Andre Andre Przywara (4): regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones dt-bindings: mfd: x-powers,axp152: add boost regulator mfd: axp20x: AXP717: Add support for boost regulator regulator: axp20x: AXP717: Add boost regulator .../bindings/mfd/x-powers,axp152.yaml | 2 +- drivers/mfd/axp20x.c | 2 ++ drivers/regulator/axp20x-regulator.c | 32 +++++++++++-------- include/linux/mfd/axp20x.h | 3 ++ 4 files changed, 24 insertions(+), 15 deletions(-) base-commit: 4cece764965020c22cff7665b18a012006359095 prerequisite-patch-id: 2b5fb10f68e0994071fc4c7dce73db7047c23220 prerequisite-patch-id: 5d0735de888d155b2c1cdb814e852a5852a17ec7 prerequisite-patch-id: 29c30894b4bf0b9e1e71de065cabbd842505e248 prerequisite-patch-id: 0ab87cbf7362b6dc2d577d2264eb9574be47b5f6 -- 2.35.8