Re: [PATCH v2 2/3] hwmon: (max31790): Support config PWM output becomes TACH

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le 14/04/2024 à 06:22, Chanh Nguyen a écrit :
PWMOUT pins on MAX31790 can be configured as a tachometer input pin by
setting bit[0] in the Configuration Register. When the bit[0] of a channel
is set, the PWMOUT pin becomes the tach input pin for the channel plus six.

This commit allows the kernel to set those pins when necessary if the
maxim,pwmout-pin-as-tach-input DT property exists.

Signed-off-by: Chanh Nguyen <chanh@xxxxxxxxxxxxxxxxxxxxxx>
---
Changes in v2:
  - Update the vendor property name to "maxim,pwmout-pin-as-tach-input"   [Rob]

...

@@ -528,6 +532,33 @@ static int max31790_probe(struct i2c_client *client)
  	if (err)
  		return err;
+ if (device_property_present(dev, "maxim,pwmout-pin-as-tach-input")) {
+		err = device_property_read_u8_array(dev, "maxim,pwmout-pin-as-tach-input",
+						    pwmout_to_tach, NR_CHANNEL);
+		if (err) {
+			/* The maxim,pwmout-pin-as-tach-input is an array of six values */
+			dev_warn(dev, "The maxim,pwmout-pin-as-tach-input property exist but malform");

Nit: exists
Nit: malformed or "is malformed"

CJ




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux