Re: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk: Increase CAN max bitrate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 02.04.24 um 18:08 schrieb Nathan Morrisson:
The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which
support CAN FD at 8 Mbps.

Increase the maximum bitrate to 8 Mbps.

Signed-off-by: Nathan Morrisson <nmorrisson@xxxxxxxxxx>

For both patches

Reviewed-by: Wadim Egorov <w.egorov@xxxxxxxxx>


---
  arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 8237b8c815b8..522699ec65e8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -42,7 +42,7 @@ can_tc1: can-phy0 {
  		pinctrl-names = "default";
  		pinctrl-0 = <&can_tc1_pins_default>;
  		#phy-cells = <0>;
-		max-bitrate = <5000000>;
+		max-bitrate = <8000000>;
  		standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
  	};
@@ -51,7 +51,7 @@ can_tc2: can-phy1 {
  		pinctrl-names = "default";
  		pinctrl-0 = <&can_tc2_pins_default>;
  		#phy-cells = <0>;
-		max-bitrate = <5000000>;
+		max-bitrate = <8000000>;
  		standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
  	};




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux