The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which support CAN FD at 8 Mbps. Increase the maximum bitrate to 8 Mbps. Signed-off-by: Nathan Morrisson <nmorrisson@xxxxxxxxxx> --- arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index 8237b8c815b8..522699ec65e8 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -42,7 +42,7 @@ can_tc1: can-phy0 { pinctrl-names = "default"; pinctrl-0 = <&can_tc1_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>; }; @@ -51,7 +51,7 @@ can_tc2: can-phy1 { pinctrl-names = "default"; pinctrl-0 = <&can_tc2_pins_default>; #phy-cells = <0>; - max-bitrate = <5000000>; + max-bitrate = <8000000>; standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>; }; -- 2.25.1