The TC9595 reset GPIO is SAI1_RXC / GPIO4_IO01, fix the DT accordingly.
The SAI5_RXD0 / GPIO3_IO21 is thus far unused TC9595 interrupt line.
Fixes: 20d0b83e712b ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index d8963f32ec84c..1f3fbfb9749d3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -255,7 +255,7 @@ tc_bridge: bridge@f {
<&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
assigned-clock-rates = <13000000>, <13000000>, <156000000>;
- reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
status = "disabled";
ports {
--
2.43.0
