Re: [PATCH v1] ARM: dts: imx7: remove DSI port endpoints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 23, 2024 at 06:19:01PM +0100, Francesco Dolcini wrote:
> On Fri, Feb 16, 2024 at 11:42:55AM +0100, Francesco Dolcini wrote:
> > From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> > 
> > This fixes the display not working on colibri imx7, the driver fails to
> > load with the following error:
> > 
> >   mxsfb 30730000.lcdif: error -ENODEV: Cannot connect bridge
> > 
> > NXP i.MX7 LCDIF is connected to both the Parallel LCD Display and to a
> > MIPI DSI IP block, currently it's not possible to describe the
> > connection to both.
> > 
> > Remove the port endpoint from the SOC dtsi to prevent regressions, this
> > would need to be defined on the board DTS.
> > 
> > Reported-by: Hiago De Franco <hiagofranco@xxxxxxxxx>
> > Closes: https://lore.kernel.org/r/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
> > Fixes: edbbae7fba49 ("ARM: dts: imx7: add MIPI-DSI support")
> > Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> 
> Hello Shawn, what do you plan to do with this?
> 
> This fixes a regression from v6.8-rc1 and would be nice to have it into
> the final v6.8.

Applied as a fix for 6.8, thanks!





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux