Hi Ghennadi,
On Mon, Jan 22, 2024 at 03:39:09PM +0100, Matthias Brugger wrote:
>
>
> On 22/01/2024 15:06, Ghennadi Procopciuc wrote:
> > From: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx>
> >
> > Linux controls the clocks over SCMI on S32G SoCs. Therefore,
> > add the SCMI device tree node and the reserved region for SCMI
Is there any dt-binding required to match the SCMI clock IDs declared in
SCMI? I assume that s32g series will need fixed dt-bindings for clocks to make
sure there will be no kabi issue in the future.
Thanks,
Chester
> > messages.
> >
> > Signed-off-by: Catalin Udma <catalin-dan.udma@xxxxxxx>
> > Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx>
>
> Reviewed-by: Matthias Brugger <mbrugger@xxxxxxxx>
>
> > ---
> > arch/arm64/boot/dts/freescale/s32g2.dtsi | 27 +++++++++++++++++++++++-
> > 1 file changed, 26 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> > index 5ac1cc9ff50e..ef1a1d61f2ba 100644
> > --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> > @@ -3,7 +3,7 @@
> > * NXP S32G2 SoC family
> > *
> > * Copyright (c) 2021 SUSE LLC
> > - * Copyright (c) 2017-2021 NXP
> > + * Copyright 2017-2021, 2024 NXP
> > */
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > @@ -14,6 +14,18 @@ / {
> > #address-cells = <2>;
> > #size-cells = <2>;
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + scmi_buf: shm@d0000000 {
> > + compatible = "arm,scmi-shmem";
> > + reg = <0x0 0xd0000000 0x0 0x80>;
> > + no-map;
> > + };
> > + };
> > +
> > cpus {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > @@ -77,6 +89,19 @@ timer {
> > };
> > firmware {
> > + scmi {
> > + compatible = "arm,scmi-smc";
> > + arm,smc-id = <0xc20000fe>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + shmem = <&scmi_buf>;
> > +
> > + clks: protocol@14 {
> > + reg = <0x14>;
> > + #clock-cells = <1>;
> > + };
> > + };
> > +
> > psci {
> > compatible = "arm,psci-1.0";
> > method = "smc";
