From: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx>
Linux controls the clocks over SCMI on S32G SoCs. Therefore,
add the SCMI device tree node and the reserved region for SCMI
messages.
Signed-off-by: Catalin Udma <catalin-dan.udma@xxxxxxx>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@xxxxxxx>
---
arch/arm64/boot/dts/freescale/s32g2.dtsi | 27 +++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 5ac1cc9ff50e..ef1a1d61f2ba 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -3,7 +3,7 @@
* NXP S32G2 SoC family
*
* Copyright (c) 2021 SUSE LLC
- * Copyright (c) 2017-2021 NXP
+ * Copyright 2017-2021, 2024 NXP
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -14,6 +14,18 @@ / {
#address-cells = <2>;
#size-cells = <2>;
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ scmi_buf: shm@d0000000 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x0 0xd0000000 0x0 0x80>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -77,6 +89,19 @@ timer {
};
firmware {
+ scmi {
+ compatible = "arm,scmi-smc";
+ arm,smc-id = <0xc20000fe>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ shmem = <&scmi_buf>;
+
+ clks: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
--
2.43.0
