On Wed Feb 21, 2024 at 11:48 AM CET, Pratyush Yadav wrote: > On Wed, Feb 21 2024, Michael Walle wrote: > > > [+ Takahiro] > > > > Hi, > > > > On Wed Feb 21, 2024 at 10:13 AM CET, Josua Mayer wrote: > >> Hi, > >> > >> Am 21.02.24 um 09:27 schrieb Michael Walle: > >> > Hi, > >> > > >> > On Mon Feb 19, 2024 at 3:41 PM CET, Josua Mayer wrote: > >> >> Some spi flash memories have an interrupt signal which can be used for > >> >> signalling on-chip events such as busy status or ecc errors to the host. > >> > Do you have an example? Maybe one with a public datasheet? > >> > >> My example is Infineon S28HS512T, however datasheet download requires > >> user account. > >> > >> S26HS512T has interrupt line, too, and datasheet is downloadable without > >> registration: > >> https://www.infineon.com/cms/en/product/memories/nor-flash/semper-nor-flash-family/semper-nor-flash/#!documents > > > > Thanks, as far as I can see, both are hyperbus flashes. I'm asking > > because I'm not aware of any SPI NOR flash with an interrupt line. > > I found this datasheet [0] for S28H flash family from Infineon on > Google. These are SPI NOR flashes. In pinout you can see there is an > INT# signal. The signal description says: "System Interrupt (INT#). When > LOW, the device is indicating that an internal event has occurred." > Further in section 4.1.1.5 "INT# Output" it says: > > HL-T/HS-T supports INT# output pin to indicate to the host system > that an event has occurred within the flash device. The user can > configure the INT# output pin to transition to the active (LOW) > state when: > > - 2-bit ECC error is detected > - 1-bit ECC error is detected > - Transitioning from the Busy to the Ready state > > [0] https://www.infineon.com/dgdl/Infineon-S28HS256T_S28HS512T_S28HS01GT_S28HL256T_S28HL512T_S28HL01GT_256-Mb_(32-MB)_512-Mb_(64-MB)_1-Gb_(128-MB)_HS-T_(1.8-V)_HL-T_(3.0-V)_Semper_Flash_with_Octal_Interface-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee6bca96f97&da=t Okay then, Acked-by: Michael Walle <mwalle@xxxxxxxxxx> -michael
Attachment:
signature.asc
Description: PGP signature
