Some spi flash memories have an interrupt signal which can be used for signalling on-chip events such as busy status or ecc errors to the host. Add binding for "interrupts" property so that boards wiring this signal may describe the connection. Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- Changes in v7: - split out of original patchset because it should go via mtd tree - collected acked-by Rob Herring from v6 - Link to v6: https://lore.kernel.org/r/20240212-add-am64-som-v6-0-b59edb2bc8c3@xxxxxxxxxxxxx --- Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml index 58f0cea160ef..6e3afb42926e 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml @@ -52,6 +52,9 @@ properties: minItems: 1 maxItems: 2 + interrupts: + maxItems: 1 + m25p,fast-read: type: boolean description: --- base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d change-id: 20240219-mtd-flash-interrupt-binding-647f78d123cb Best regards, -- Josua Mayer <josua@xxxxxxxxxxxxx>
