On Thu, Jan 29, 2015 at 1:03 PM, Rob Herring <robherring2@xxxxxxxxx> wrote:
> On Thu, Jan 29, 2015 at 8:55 AM, Jacek Anaszewski
> <j.anaszewski@xxxxxxxxxxx> wrote:
>> Hi Rob,
>>
>> Have we achieved consensus concerning this patch?
>> If so, can you give your ack?
>
> I think so.
>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
>
>>
OK, I can merge this patch into my tree with you guys Ack.
Jacek, does this patch depend on the first one which you are still
discussing with Pavel? Can I merge this one firstly.
-Bryan
>>
>> On 01/27/2015 09:07 AM, Jacek Anaszewski wrote:
>>>
>>> Add a property for defining device outputs the LED
>>> represented by the DT child node is connected to.
>>>
>>> Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
>>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>>> Cc: Bryan Wu <cooloney@xxxxxxxxx>
>>> Cc: Richard Purdie <rpurdie@xxxxxxxxx>
>>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>>> Cc: Pawel Moll <pawel.moll@xxxxxxx>
>>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>>> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
>>> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
>>> Cc: devicetree@xxxxxxxxxxxxxxx
>>> ---
>>> Documentation/devicetree/bindings/leds/common.txt | 16
>>> +++++++++++++++-
>>> 1 file changed, 15 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/leds/common.txt
>>> b/Documentation/devicetree/bindings/leds/common.txt
>>> index a2c3f7a..34811c5 100644
>>> --- a/Documentation/devicetree/bindings/leds/common.txt
>>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>>> @@ -1,6 +1,19 @@
>>> Common leds properties.
>>>
>>> +LED and flash LED devices provide the same basic functionality as current
>>> +regulators, but extended with LED and flash LED specific features like
>>> +blinking patterns, flash timeout, flash faults and external flash strobe
>>> mode.
>>> +
>>> +Many LED devices expose more than one current output that can be
>>> connected
>>> +to one or more discrete LED component. Since the arrangement of
>>> connections
>>> +can influence the way of the LED device initialization, the LED
>>> components
>>> +have to be tightly coupled with the LED device binding. They are
>>> represented
>>> +by child nodes of the parent LED device binding.
>>> +
>>> Optional properties for child nodes:
>>> +- led-sources : List of device current outputs the LED is connected to.
>>> The
>>> + outputs are identified by the numbers that must be defined
>>> + in the LED device binding documentation.
>>> - label : The label for this LED. If omitted, the label is
>>> taken from the node name (excluding the unit address).
>>>
>>> @@ -33,7 +46,8 @@ system-status {
>>>
>>> camera-flash {
>>> label = "Flash";
>>> + led-sources = <0>, <1>;
>>> max-microamp = <50000>;
>>> flash-max-microamp = <320000>;
>>> flash-timeout-us = <500000>;
>>> -}
>>> +};
>>>
>>
>>
>> --
>> Best Regards,
>> Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
