On Thu, Jan 29, 2015 at 8:55 AM, Jacek Anaszewski
<j.anaszewski@xxxxxxxxxxx> wrote:
> Hi Rob,
>
> Have we achieved consensus concerning this patch?
> If so, can you give your ack?
I think so.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
>
>
> On 01/27/2015 09:07 AM, Jacek Anaszewski wrote:
>>
>> Add a property for defining device outputs the LED
>> represented by the DT child node is connected to.
>>
>> Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>> Cc: Bryan Wu <cooloney@xxxxxxxxx>
>> Cc: Richard Purdie <rpurdie@xxxxxxxxx>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: Pawel Moll <pawel.moll@xxxxxxx>
>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
>> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
>> Cc: devicetree@xxxxxxxxxxxxxxx
>> ---
>> Documentation/devicetree/bindings/leds/common.txt | 16
>> +++++++++++++++-
>> 1 file changed, 15 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/common.txt
>> b/Documentation/devicetree/bindings/leds/common.txt
>> index a2c3f7a..34811c5 100644
>> --- a/Documentation/devicetree/bindings/leds/common.txt
>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>> @@ -1,6 +1,19 @@
>> Common leds properties.
>>
>> +LED and flash LED devices provide the same basic functionality as current
>> +regulators, but extended with LED and flash LED specific features like
>> +blinking patterns, flash timeout, flash faults and external flash strobe
>> mode.
>> +
>> +Many LED devices expose more than one current output that can be
>> connected
>> +to one or more discrete LED component. Since the arrangement of
>> connections
>> +can influence the way of the LED device initialization, the LED
>> components
>> +have to be tightly coupled with the LED device binding. They are
>> represented
>> +by child nodes of the parent LED device binding.
>> +
>> Optional properties for child nodes:
>> +- led-sources : List of device current outputs the LED is connected to.
>> The
>> + outputs are identified by the numbers that must be defined
>> + in the LED device binding documentation.
>> - label : The label for this LED. If omitted, the label is
>> taken from the node name (excluding the unit address).
>>
>> @@ -33,7 +46,8 @@ system-status {
>>
>> camera-flash {
>> label = "Flash";
>> + led-sources = <0>, <1>;
>> max-microamp = <50000>;
>> flash-max-microamp = <320000>;
>> flash-timeout-us = <500000>;
>> -}
>> +};
>>
>
>
> --
> Best Regards,
> Jacek Anaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
