[PATCH v4 01/10] dt-bindings: display: bridge: tc358775: make stby gpio optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Michael Walle <mwalle@xxxxxxxxxx>

For a normal operation, the stby GPIO is not needed.

The reset pin is required because once the PPI (PHY protocol interface)
is started, it can only be stopped by asserting the reset pin.

Signed-off-by: Michael Walle <mwalle@xxxxxxxxxx>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
[tony@xxxxxxxxxxx: dropped regulator related changes]
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 .../devicetree/bindings/display/bridge/toshiba,tc358775.yaml     | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -70,7 +70,6 @@ required:
   - reg
   - vdd-supply
   - vddio-supply
-  - stby-gpios
   - reset-gpios
   - ports
 
-- 
2.43.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux