Hi all, Here are v4 patches to improve tc358775 driver and add support for tc358765. Regards, Tony Changes since v3: - Fixed dts binding warnings Changes since v2: - Only make stby-gpios optional for tc358775, and disallow them for tc358765 as noted by Krzysztof - Added additionalProperties: false for port-base as noted by Krzysztof - Updated patch description for why there can be a data-lanes property for both the DSI host and the bridge as noted by Dmitry - Improved the old dtb data-lanes warning as suggested by Michael - Fix warning on casting of_device_get_match_data() as noted by the kernel test robot Changes since v1: - After a brief offline discussion with Michael, merge series with Michael's patch series to make stby gpio and supplies optional as they may be hardwired - Use Michael's better patch for the jeida timings change - Parse lanes on the bridge side like other bridge devices do, and if not found, also parse on the DSI host side and warn Michael Walle (3): dt-bindings: display: bridge: tc358775: make stby gpio optional drm/bridge: tc358775: fix support for jeida-18 and jeida-24 drm/bridge: tc358775: make standby GPIO optional Tony Lindgren (7): dt-bindings: display: bridge: tc358775: Add data-lanes dt-bindings: display: bridge: tc358775: Add support for tc358765 drm/bridge: tc358775: Get bridge data lanes instead of the DSI host lanes drm/bridge: tc358775: Add burst and low-power modes drm/bridge: tc358775: Enable pre_enable_prev_first flag drm/bridge: tc358775: Add support for tc358765 drm/bridge: tc358775: Configure hs_rate and lp_rate .../display/bridge/toshiba,tc358775.yaml | 39 ++++++-- drivers/gpu/drm/bridge/tc358775.c | 98 ++++++++++++------- 2 files changed, 94 insertions(+), 43 deletions(-) -- 2.43.1