For better usability group the line display drivers together in Kconfig and Makefile. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/auxdisplay/Kconfig | 32 ++++++++++++++++---------------- drivers/auxdisplay/Makefile | 12 ++++++------ 2 files changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index d944d5298eca..a34a9a52158f 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -25,12 +25,6 @@ config CHARLCD This is some character LCD core interface that multiple drivers can use. -config LINEDISP - tristate "Character line display core support" if COMPILE_TEST - help - This is the core support for single-line character displays, to be - selected by drivers that use it. - config HD44780_COMMON tristate "Common functions for HD44780 (and compatibles) LCD displays" if COMPILE_TEST select CHARLCD @@ -52,6 +46,16 @@ config HD44780 kernel and started at boot. If you don't understand what all this is about, say N. +config LCD2S + tristate "lcd2s 20x4 character display over I2C console" + depends on I2C + select CHARLCD + help + This is a driver that lets you use the lcd2s 20x4 character display + from Modtronix engineering as a console output device. The display + is a simple single color character display. You have to connect it + to an I2C bus. + config KS0108 tristate "KS0108 LCD Controller" depends on PARPORT_PC @@ -153,6 +157,12 @@ config CFAG12864B_RATE If you compile this as a module, you can still override this value using the module parameters. +config LINEDISP + tristate "Character line display core support" if COMPILE_TEST + help + This is the core support for single-line character displays, to be + selected by drivers that use it. + config IMG_ASCII_LCD tristate "Imagination Technologies ASCII LCD Display" depends on HAS_IOMEM @@ -177,16 +187,6 @@ config HT16K33 Say yes here to add support for Holtek HT16K33, RAM mapping 16*8 LED controller driver with keyscan. -config LCD2S - tristate "lcd2s 20x4 character display over I2C console" - depends on I2C - select CHARLCD - help - This is a driver that lets you use the lcd2s 20x4 character display - from Modtronix engineering as a console output device. The display - is a simple single color character display. You have to connect it - to an I2C bus. - config ARM_CHARLCD bool "ARM Ltd. Character LCD Driver" depends on PLAT_VERSATILE diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile index 6968ed4d3f0a..43bad850481c 100644 --- a/drivers/auxdisplay/Makefile +++ b/drivers/auxdisplay/Makefile @@ -5,12 +5,12 @@ obj-$(CONFIG_CHARLCD) += charlcd.o obj-$(CONFIG_HD44780_COMMON) += hd44780_common.o -obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o +obj-$(CONFIG_HD44780) += hd44780.o +obj-$(CONFIG_LCD2S) += lcd2s.o obj-$(CONFIG_KS0108) += ks0108.o obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o -obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o -obj-$(CONFIG_HD44780) += hd44780.o -obj-$(CONFIG_HT16K33) += ht16k33.o -obj-$(CONFIG_PARPORT_PANEL) += panel.o -obj-$(CONFIG_LCD2S) += lcd2s.o obj-$(CONFIG_LINEDISP) += line-display.o +obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o +obj-$(CONFIG_HT16K33) += ht16k33.o +obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o +obj-$(CONFIG_PARPORT_PANEL) += panel.o -- 2.43.0.rc1.1.gbec44491f096
