[net-next PATCH v7 07/10] net: phy: qcom: add support for QCA807x PHY Family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Robert Marko <robert.marko@xxxxxxxxxx>

This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.

They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te,
100BASE-TX and 1000BASE-T PHY-s.

They feature 2 SerDes, one for PSGMII or QSGMII connection with
MAC, while second one is SGMII for connection to MAC or fiber.

Both models have a combo port that supports 1000BASE-X and
100BASE-FX fiber.

PHY package can be configured in 3 mode following this table:

              First Serdes mode       Second Serdes mode
Option 1      PSGMII for copper       Disabled
              ports 0-4
Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
              ports 0-4
Option 3      QSGMII for copper       SGMII for
              ports 0-3               copper port 4

Each PHY inside of QCA807x series has 4 digitally controlled
output only pins that natively drive LED-s.
But some vendors used these to driver generic LED-s controlled
by userspace, so lets enable registering each PHY as GPIO
controller and add driver for it.

These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x
boards.

Co-developed-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
---
 drivers/net/phy/qcom/Kconfig   |   8 +
 drivers/net/phy/qcom/Makefile  |   1 +
 drivers/net/phy/qcom/qca807x.c | 597 +++++++++++++++++++++++++++++++++
 3 files changed, 606 insertions(+)
 create mode 100644 drivers/net/phy/qcom/qca807x.c

diff --git a/drivers/net/phy/qcom/Kconfig b/drivers/net/phy/qcom/Kconfig
index 80db24deb689..570626cc8e14 100644
--- a/drivers/net/phy/qcom/Kconfig
+++ b/drivers/net/phy/qcom/Kconfig
@@ -20,3 +20,11 @@ config QCA808X_PHY
 	select QCOM_NET_PHYLIB
 	help
 	  Currently supports the QCA8081 model
+
+config QCA807X_PHY
+	tristate "Qualcomm QCA807x PHYs"
+	select QCOM_NET_PHYLIB
+	depends on OF_MDIO
+	help
+	  Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII
+	  control PHY.
diff --git a/drivers/net/phy/qcom/Makefile b/drivers/net/phy/qcom/Makefile
index 0362d7ed47be..f24fb550babd 100644
--- a/drivers/net/phy/qcom/Makefile
+++ b/drivers/net/phy/qcom/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_QCOM_NET_PHYLIB)	+= qcom-phy-lib.o
 obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 obj-$(CONFIG_QCA83XX_PHY)	+= qca83xx.o
 obj-$(CONFIG_QCA808X_PHY)	+= qca808x.o
+obj-$(CONFIG_QCA807X_PHY)	+= qca807x.o
diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
new file mode 100644
index 000000000000..43fc9cddd975
--- /dev/null
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@xxxxxxxxxx>
+ *         Christian Marangi <ansuelsmth@xxxxxxxxx>
+ *
+ * Qualcomm QCA8072 and QCA8075 PHY driver
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/bitfield.h>
+#include <linux/gpio/driver.h>
+#include <linux/sfp.h>
+
+#include "qcom.h"
+
+#define QCA807X_CHIP_CONFIGURATION				0x1f
+#define QCA807X_BT_BX_REG_SEL					BIT(15)
+#define QCA807X_BT_BX_REG_SEL_FIBER				0
+#define QCA807X_BT_BX_REG_SEL_COPPER				1
+#define QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK		GENMASK(3, 0)
+#define QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII		4
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER		3
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER	0
+
+#define QCA807X_MEDIA_SELECT_STATUS				0x1a
+#define QCA807X_MEDIA_DETECTED_COPPER				BIT(5)
+#define QCA807X_MEDIA_DETECTED_1000_BASE_X			BIT(4)
+#define QCA807X_MEDIA_DETECTED_100_BASE_FX			BIT(3)
+
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION			0x807e
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN		BIT(0)
+
+#define QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH	0x801a
+#define QCA807X_CONTROL_DAC_MASK				GENMASK(2, 0)
+/* List of tweaks enabled by this bit:
+ * - With both FULL amplitude and FULL bias current: bias current
+ *   is set to half.
+ * - With only DSP amplitude: bias current is set to half and
+ *   is set to 1/4 with cable < 10m.
+ * - With DSP bias current (included both DSP amplitude and
+ *   DSP bias current): bias current is half the detected current
+ *   with cable < 10m.
+ */
+#define QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK			BIT(2)
+#define QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT			BIT(1)
+#define QCA807X_CONTROL_DAC_DSP_AMPLITUDE			BIT(0)
+
+#define QCA807X_MMD7_LED_100N_1				0x8074
+#define QCA807X_MMD7_LED_100N_2				0x8075
+#define QCA807X_MMD7_LED_1000N_1			0x8076
+#define QCA807X_MMD7_LED_1000N_2			0x8077
+
+#define QCA807X_MMD7_LED_CTRL(x)			(0x8074 + ((x) * 2))
+#define QCA807X_MMD7_LED_FORCE_CTRL(x)			(0x8075 + ((x) * 2))
+
+#define QCA807X_GPIO_FORCE_EN				BIT(15)
+#define QCA807X_GPIO_FORCE_MODE_MASK			GENMASK(14, 13)
+
+#define QCA807X_FUNCTION_CONTROL			0x10
+#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK		GENMASK(6, 5)
+#define QCA807X_FC_MDI_CROSSOVER_AUTO			3
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX		1
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI		0
+
+/* PQSGMII Analog PHY specific */
+#define PQSGMII_CTRL_REG				0x0
+#define PQSGMII_ANALOG_SW_RESET				BIT(6)
+#define PQSGMII_DRIVE_CONTROL_1				0xb
+#define PQSGMII_TX_DRIVER_MASK				GENMASK(7, 4)
+#define PQSGMII_TX_DRIVER_140MV				0x0
+#define PQSGMII_TX_DRIVER_160MV				0x1
+#define PQSGMII_TX_DRIVER_180MV				0x2
+#define PQSGMII_TX_DRIVER_200MV				0x3
+#define PQSGMII_TX_DRIVER_220MV				0x4
+#define PQSGMII_TX_DRIVER_240MV				0x5
+#define PQSGMII_TX_DRIVER_260MV				0x6
+#define PQSGMII_TX_DRIVER_280MV				0x7
+#define PQSGMII_TX_DRIVER_300MV				0x8
+#define PQSGMII_TX_DRIVER_320MV				0x9
+#define PQSGMII_TX_DRIVER_400MV				0xa
+#define PQSGMII_TX_DRIVER_500MV				0xb
+#define PQSGMII_TX_DRIVER_600MV				0xc
+#define PQSGMII_MODE_CTRL				0x6d
+#define PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK		BIT(0)
+#define PQSGMII_MMD3_SERDES_CONTROL			0x805a
+
+#define PHY_ID_QCA8072		0x004dd0b2
+#define PHY_ID_QCA8075		0x004dd0b1
+
+#define QCA807X_COMBO_ADDR_OFFSET			4
+#define QCA807X_PQSGMII_ADDR_OFFSET			5
+#define SERDES_RESET_SLEEP				100
+
+enum qca807x_global_phy {
+	QCA807X_COMBO_ADDR = 4,
+	QCA807X_PQSGMII_ADDR = 5,
+};
+
+struct qca807x_shared_priv {
+	unsigned int package_mode;
+	u32 tx_drive_strength;
+};
+
+struct qca807x_gpio_priv {
+	struct phy_device *phy;
+};
+
+struct qca807x_priv {
+	bool dac_full_amplitude;
+	bool dac_full_bias_current;
+	bool dac_disable_bias_current_tweak;
+};
+
+static int qca807x_cable_test_start(struct phy_device *phydev)
+{
+	/* we do all the (time consuming) work later */
+	return 0;
+}
+
+#ifdef CONFIG_GPIOLIB
+static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int qca807x_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+	u16 reg;
+	int val;
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
+
+	return FIELD_GET(QCA807X_GPIO_FORCE_MODE_MASK, val);
+}
+
+static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+	u16 reg;
+	int val;
+
+	reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
+
+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
+	val &= ~QCA807X_GPIO_FORCE_MODE_MASK;
+	val |= QCA807X_GPIO_FORCE_EN;
+	val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value);
+
+	phy_write_mmd(priv->phy, MDIO_MMD_AN, reg, val);
+}
+
+static int qca807x_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	qca807x_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int qca807x_gpio(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct qca807x_gpio_priv *priv;
+	struct gpio_chip *gc;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phy = phydev;
+
+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->label = dev_name(dev);
+	gc->base = -1;
+	gc->ngpio = 2;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+	gc->can_sleep = true;
+	gc->get_direction = qca807x_gpio_get_direction;
+	gc->direction_output = qca807x_gpio_dir_out;
+	gc->get = qca807x_gpio_get;
+	gc->set = qca807x_gpio_set;
+
+	return devm_gpiochip_add_data(dev, gc, priv);
+}
+#endif
+
+static int qca807x_read_fiber_status(struct phy_device *phydev)
+{
+	bool changed;
+	int ss, err;
+
+	err = genphy_c37_read_status(phydev, &changed);
+	if (err || !changed)
+		return err;
+
+	/* Read the QCA807x PHY-Specific Status register fiber page,
+	 * which indicates the speed and duplex that the PHY is actually
+	 * using, irrespective of whether we are in autoneg mode or not.
+	 */
+	ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
+	if (ss < 0)
+		return ss;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
+		switch (FIELD_GET(AT803X_SS_SPEED_MASK, ss)) {
+		case AT803X_SS_SPEED_100:
+			phydev->speed = SPEED_100;
+			break;
+		case AT803X_SS_SPEED_1000:
+			phydev->speed = SPEED_1000;
+			break;
+		}
+
+		if (ss & AT803X_SS_DUPLEX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+	}
+
+	return 0;
+}
+
+static int qca807x_read_status(struct phy_device *phydev)
+{
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) {
+		switch (phydev->port) {
+		case PORT_FIBRE:
+			return qca807x_read_fiber_status(phydev);
+		case PORT_TP:
+			return at803x_read_status(phydev);
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return at803x_read_status(phydev);
+}
+
+static int qca807x_phy_package_probe_once(struct phy_device *phydev)
+{
+	struct phy_package_shared *shared = phydev->shared;
+	struct qca807x_shared_priv *priv = shared->priv;
+	unsigned int tx_drive_strength;
+	const char *package_mode_name;
+
+	/* Default to 600mw if not defined */
+	if (of_property_read_u32(shared->np, "qcom,tx-drive-strength-milliwatt",
+				 &tx_drive_strength))
+		tx_drive_strength = 600;
+
+	switch (tx_drive_strength) {
+	case 140:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_140MV;
+		break;
+	case 160:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_160MV;
+		break;
+	case 180:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_180MV;
+		break;
+	case 200:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_200MV;
+		break;
+	case 220:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_220MV;
+		break;
+	case 240:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_240MV;
+		break;
+	case 260:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_260MV;
+		break;
+	case 280:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_280MV;
+		break;
+	case 300:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_300MV;
+		break;
+	case 320:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_320MV;
+		break;
+	case 400:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_400MV;
+		break;
+	case 500:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_500MV;
+		break;
+	case 600:
+		priv->tx_drive_strength = PQSGMII_TX_DRIVER_600MV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	priv->package_mode = PHY_INTERFACE_MODE_NA;
+	if (!of_property_read_string(shared->np, "qcom,package-mode",
+				     &package_mode_name)) {
+		if (!strcasecmp(package_mode_name,
+				phy_modes(PHY_INTERFACE_MODE_PSGMII)))
+			priv->package_mode = PHY_INTERFACE_MODE_PSGMII;
+		else if (!strcasecmp(package_mode_name,
+				     phy_modes(PHY_INTERFACE_MODE_QSGMII)))
+			priv->package_mode = PHY_INTERFACE_MODE_QSGMII;
+		else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int qca807x_phy_package_config_init_once(struct phy_device *phydev)
+{
+	struct phy_package_shared *shared = phydev->shared;
+	struct qca807x_shared_priv *priv = shared->priv;
+	int val, ret;
+
+	phy_lock_mdio_bus(phydev);
+
+	/* Set correct PHY package mode */
+	val = __phy_package_read(phydev, QCA807X_COMBO_ADDR,
+				 QCA807X_CHIP_CONFIGURATION);
+	val &= ~QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK;
+	/* package_mode can be QSGMII or PSGMII and we validate
+	 * this in probe_once.
+	 * With package_mode to NA, we default to PSGMII.
+	 */
+	switch (priv->package_mode) {
+	case PHY_INTERFACE_MODE_QSGMII:
+		val |= QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII;
+		break;
+	case PHY_INTERFACE_MODE_PSGMII:
+	default:
+		val |= QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER;
+	}
+	ret = __phy_package_write(phydev, QCA807X_COMBO_ADDR,
+				  QCA807X_CHIP_CONFIGURATION, val);
+	if (ret)
+		goto exit;
+
+	/* After mode change Serdes reset is required */
+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+				 PQSGMII_CTRL_REG);
+	val &= ~PQSGMII_ANALOG_SW_RESET;
+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+				  PQSGMII_CTRL_REG, val);
+	if (ret)
+		goto exit;
+
+	msleep(SERDES_RESET_SLEEP);
+
+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+				 PQSGMII_CTRL_REG);
+	val |= PQSGMII_ANALOG_SW_RESET;
+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+				  PQSGMII_CTRL_REG, val);
+	if (ret)
+		goto exit;
+
+	/* Workaround to enable AZ transmitting ability */
+	val = __phy_package_read_mmd(phydev, QCA807X_PQSGMII_ADDR,
+				     MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL);
+	val &= ~PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK;
+	ret = __phy_package_write_mmd(phydev, QCA807X_PQSGMII_ADDR,
+				      MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL, val);
+	if (ret)
+		goto exit;
+
+	/* Set PQSGMII TX AMP strength */
+	val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+				 PQSGMII_DRIVE_CONTROL_1);
+	val &= ~PQSGMII_TX_DRIVER_MASK;
+	val |= FIELD_PREP(PQSGMII_TX_DRIVER_MASK, priv->tx_drive_strength);
+	ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+				  PQSGMII_DRIVE_CONTROL_1, val);
+	if (ret)
+		goto exit;
+
+	/* Prevent PSGMII going into hibernation via PSGMII self test */
+	val = __phy_package_read_mmd(phydev, QCA807X_COMBO_ADDR,
+				     MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL);
+	val &= ~BIT(1);
+	ret = __phy_package_write_mmd(phydev, QCA807X_COMBO_ADDR,
+				      MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL, val);
+
+exit:
+	phy_unlock_mdio_bus(phydev);
+
+	return ret;
+}
+
+static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+	struct phy_device *phydev = upstream;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	phy_interface_t iface;
+	int ret;
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
+
+	sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
+	iface = sfp_select_interface(phydev->sfp_bus, support);
+
+	dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface));
+
+	switch (iface) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_100BASEX:
+		/* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */
+		ret = phy_modify(phydev,
+				 QCA807X_CHIP_CONFIGURATION,
+				 QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK,
+				 QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER);
+		/* Enable fiber mode autodection (1000Base-X or 100Base-FX) */
+		ret = phy_set_bits_mmd(phydev,
+				       MDIO_MMD_AN,
+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION,
+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN);
+		/* Select fiber page */
+		ret = phy_clear_bits(phydev,
+				     QCA807X_CHIP_CONFIGURATION,
+				     QCA807X_BT_BX_REG_SEL);
+
+		phydev->port = PORT_FIBRE;
+		break;
+	default:
+		dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static void qca807x_sfp_remove(void *upstream)
+{
+	struct phy_device *phydev = upstream;
+
+	/* Select copper page */
+	phy_set_bits(phydev,
+		     QCA807X_CHIP_CONFIGURATION,
+		     QCA807X_BT_BX_REG_SEL);
+
+	phydev->port = PORT_TP;
+}
+
+static const struct sfp_upstream_ops qca807x_sfp_ops = {
+	.attach = phy_sfp_attach,
+	.detach = phy_sfp_detach,
+	.module_insert = qca807x_sfp_insert,
+	.module_remove = qca807x_sfp_remove,
+};
+
+static int qca807x_probe(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	struct qca807x_shared_priv *shared_priv;
+	struct device *dev = &phydev->mdio.dev;
+	struct phy_package_shared *shared;
+	struct qca807x_priv *priv;
+	int ret;
+
+	ret = devm_of_phy_package_join(dev, phydev, sizeof(*shared_priv));
+	if (ret)
+		return ret;
+
+	if (phy_package_probe_once(phydev)) {
+		ret = qca807x_phy_package_probe_once(phydev);
+		if (ret)
+			return ret;
+	}
+
+	shared = phydev->shared;
+	shared_priv = shared->priv;
+
+	/* Make sure PHY follow PHY package mode if enforced */
+	if (shared_priv->package_mode != PHY_INTERFACE_MODE_NA &&
+	    phydev->interface != shared_priv->package_mode)
+		return -EINVAL;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dac_full_amplitude = of_property_read_bool(node, "qcom,dac-full-amplitude");
+	priv->dac_full_bias_current = of_property_read_bool(node, "qcom,dac-full-bias-current");
+	priv->dac_disable_bias_current_tweak = of_property_read_bool(node,
+								     "qcom,dac-disable-bias-current-tweak");
+
+	if (IS_ENABLED(CONFIG_GPIOLIB)) {
+		/* Do not register a GPIO controller unless flagged for it */
+		if (of_property_read_bool(node, "gpio-controller")) {
+			ret = qca807x_gpio(phydev);
+			if (ret)
+				return ret;
+		}
+	}
+
+	/* Attach SFP bus on combo port*/
+	if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
+		ret = phy_sfp_probe(phydev, &qca807x_sfp_ops);
+		if (ret)
+			return ret;
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising);
+	}
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static int qca807x_config_init(struct phy_device *phydev)
+{
+	struct qca807x_priv *priv = phydev->priv;
+	u16 control_dac;
+	int ret;
+
+	if (phy_package_init_once(phydev)) {
+		ret = qca807x_phy_package_config_init_once(phydev);
+		if (ret)
+			return ret;
+	}
+
+	control_dac = phy_read_mmd(phydev, MDIO_MMD_AN,
+				   QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH);
+	control_dac &= ~QCA807X_CONTROL_DAC_MASK;
+	if (!priv->dac_full_amplitude)
+		control_dac |= QCA807X_CONTROL_DAC_DSP_AMPLITUDE;
+	if (!priv->dac_full_amplitude)
+		control_dac |= QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT;
+	if (!priv->dac_disable_bias_current_tweak)
+		control_dac |= QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK;
+	return phy_write_mmd(phydev, MDIO_MMD_AN,
+			     QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH,
+			     control_dac);
+}
+
+static struct phy_driver qca807x_drivers[] = {
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8072),
+		.name           = "Qualcomm QCA8072",
+		.flags		= PHY_POLL_CABLE_TEST,
+		/* PHY_GBIT_FEATURES */
+		.probe		= qca807x_probe,
+		.config_init	= qca807x_config_init,
+		.read_status	= qca807x_read_status,
+		.config_intr	= at803x_config_intr,
+		.handle_interrupt = at803x_handle_interrupt,
+		.soft_reset	= genphy_soft_reset,
+		.get_tunable	= at803x_get_tunable,
+		.set_tunable	= at803x_set_tunable,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.cable_test_start	= qca807x_cable_test_start,
+		.cable_test_get_status	= qca808x_cable_test_get_status,
+	},
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
+		.name           = "Qualcomm QCA8075",
+		.flags		= PHY_POLL_CABLE_TEST,
+		/* PHY_GBIT_FEATURES */
+		.probe		= qca807x_probe,
+		.config_init	= qca807x_config_init,
+		.read_status	= qca807x_read_status,
+		.config_intr	= at803x_config_intr,
+		.handle_interrupt = at803x_handle_interrupt,
+		.soft_reset	= genphy_soft_reset,
+		.get_tunable	= at803x_get_tunable,
+		.set_tunable	= at803x_set_tunable,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.cable_test_start	= qca807x_cable_test_start,
+		.cable_test_get_status	= qca808x_cable_test_get_status,
+	},
+};
+module_phy_driver(qca807x_drivers);
+
+static struct mdio_device_id __maybe_unused qca807x_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8072) },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8075) },
+	{ }
+};
+
+MODULE_AUTHOR("Robert Marko <robert.marko@xxxxxxxxxx>");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@xxxxxxxxx>");
+MODULE_DESCRIPTION("Qualcomm QCA807x PHY driver");
+MODULE_DEVICE_TABLE(mdio, qca807x_tbl);
+MODULE_LICENSE("GPL");
-- 
2.43.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux