On 05/02/24 6:27 pm, Roger Quadros wrote: > > > On 02/02/2024 18:50, Anwar, Md Danish wrote: >> On 2/2/2024 5:56 PM, Roger Quadros wrote: >>> >>> >>> On 22/01/2024 13:30, MD Danish Anwar wrote: >>>> The am642-evm doesn't allow to enable 2 x CPSW3g ports and 2 x ICSSG1 ports >>>> all together, so base k3-am642-evm.dts enables by default 2 x CPSW3g ports >>>> and 1 x ICSSG1 ports, but it also possible to support 1 x CPSW3g ports and >>>> 2 x ICSSG1 ports configuration. >>> >>> "it is also possible" >>> >>> OK so there can only be 3 ethernet ports on this board. There is no "ethernet3" alias. >>> >> >> Yes maximum there can be 3 ports only. By default 2 are cpsw and 1 icssg >> but this parch introduces overlay to change the muxed port into icssg. >> >> By default, >> ethernet0 = &cpsw_port1; >> ethernet1 = &cpsw_port2; >> ethernet2 = &icssg1_emac0; >> >> When this overlay is applied, it should be something like this, >> ethernet0 = &cpsw_port1; >> ethernet1 = &icssg1_emac0; >> ethernet2 = &icssg1_emac1; >> >> Let me know if this looks ok to you. I will modify the alias accordingly. > > ethernet0 is ok > > As per schematics: icssg1_emac0 is fixed to J21A port. so I'd call this ethernet1 > > J21B port can be switched between cpsw_port2 and icssg1_emac1. so I'd call this ethernet2 > > This way ethernet1 definition is fixed regardless and you are only switching ethernet2 > definition. > So ethernet0 and ethernet1 will be fixed and only ethernet2 will change from cpsw_port2 to icssg1_emac1 when this overlay is applied. I have posted v4 [1] before your this reply. In v4 I have kept ethernet0 and ethernet2 fixed to cpsw_port1 and icssg1_emac0 respectively and only ethernet1 changes from cpsw_port2 to icssg1_emac1 when this overlay is applied. Overlay only changes ethernet1. I think this is also a valid approach. eth0 will be fixed to cpsw and eth2 will be fixed to icssg. eth1 will toggle between cpsw and icssg. You can have a look at v4. Pls let me know if you are okay with this. [1] https://lore.kernel.org/all/20240205090546.4000446-1-danishanwar@xxxxxx/ >> >>>> >>>> This patch adds overlay to support 1 x CPSW3g ports and 2 x ICSSG1 ports >>>> configuration: >>>> - Add label name 'mdio_mux_1' for 'mdio-mux-1' node so that the node >>>> 'mdio-mux-1' can be disabled in the overlay using the label name. >>>> - disable 2nd CPSW3g port >>>> - update CPSW3g pinmuxes to not use RGMII2 >>>> - disable mdio-mux-1 and define mdio-mux-2 to route ICSSG1 MDIO to the >>>> shared DP83869 PHY >>>> - add and enable ICSSG1 RGMII2 pinmuxes >>>> - enable ICSSG1 MII1 port >>>> >>>> Signed-off-by: MD Danish Anwar <danishanwar@xxxxxx> >>>> --- >>>> arch/arm64/boot/dts/ti/Makefile | 5 ++ >>>> .../dts/ti/k3-am642-evm-icssg1-dualemac.dtso | 75 +++++++++++++++++++ >>>> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +- >>>> 3 files changed, 81 insertions(+), 1 deletion(-) >>>> create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso >>>> >>>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile >>>> index 52c1dc910308..320b2fae5730 100644 >>>> --- a/arch/arm64/boot/dts/ti/Makefile >>>> +++ b/arch/arm64/boot/dts/ti/Makefile >>>> @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb >>>> dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb >>>> dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo >>>> dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo >>>> +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo >>>> >>>> # Boards with AM65x SoC >>>> k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo >>>> @@ -105,6 +106,8 @@ k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ >>>> k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo >>>> k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ >>>> k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo >>>> +k3-am642-evm-icssg1-dualemac-dtbs := \ >>>> + k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo >>>> k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \ >>>> k3-j721e-evm-pcie0-ep.dtbo >>>> k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \ >>>> @@ -120,6 +123,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ >>>> k3-am62a7-sk-csi2-ov5640.dtb \ >>>> k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \ >>>> k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ >>>> + k3-am642-evm-icssg1-dualemac.dtb \ >>>> k3-j721e-evm-pcie0-ep.dtb \ >>>> k3-j721s2-evm-pcie1-ep.dtb >>>> >>>> @@ -129,6 +133,7 @@ DTC_FLAGS_k3-am625-sk += -@ >>>> DTC_FLAGS_k3-am62-lp-sk += -@ >>>> DTC_FLAGS_k3-am62a7-sk += -@ >>>> DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@ >>>> +DTC_FLAGS_k3-am642-evm += -@ >>>> DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ >>>> DTC_FLAGS_k3-j721e-common-proc-board += -@ >>>> DTC_FLAGS_k3-j721s2-common-proc-board += -@ >>>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso >>>> new file mode 100644 >>>> index 000000000000..b2b1a6252e73 >>>> --- /dev/null >>>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-icssg1-dualemac.dtso >>>> @@ -0,0 +1,75 @@ >>>> +// SPDX-License-Identifier: GPL-2.0 >>> >>> Don't you need to use updated licensing header like in the series [1] >>> >>> [1] https://lore.kernel.org/all/20240110140903.4090946-1-nm@xxxxxx/ >>> >> >> Sure. I will update the header. >> >>>> +/** >>>> + * DT overlay for enabling 2nd ICSSG1 port on AM642 EVM >>>> + * >>>> + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ >>>> + */ >>>> + >>>> +/dts-v1/; >>>> +/plugin/; >>>> + >>>> +#include <dt-bindings/gpio/gpio.h> >>>> +#include "k3-pinctrl.h" >>>> + >>>> +&{/} { >>> >>> You need to fixup alias for ethernet1 to icssg1_emac1? >>> >> >> Yes I will update the aliases accordingly. >> >>>> + mdio-mux-2 { >>> >>> this should be mdio-mux@0 ? >>> >> >> The main mux in evm dts is defined as mdio-mux-1 so I was following the >> same. I will change this to mdio-mux@0 >> >>>> + compatible = "mdio-mux-multiplexer"; >>>> + mux-controls = <&mdio_mux>; >>>> + mdio-parent-bus = <&icssg1_mdio>; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + >>>> + mdio@0 { >>>> + reg = <0x0>; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + >>>> + icssg1_phy2: ethernet-phy@3 { >>>> + reg = <3>; >>>> + tx-internal-delay-ps = <250>; >>>> + rx-internal-delay-ps = <2000>; >>>> + }; >>>> + }; >>>> + }; >>>> +}; >>>> + >>>> +&main_pmx0 { >>>> + icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins { >>>> + pinctrl-single,pins = < >>>> + AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ >>>> + AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ >>>> + AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ >>>> + AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ >>>> + AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ >>>> + AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ >>>> + AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ >>>> + AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ >>>> + AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ >>>> + AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ >>>> + AM64X_IOPAD(0x0148, PIN_OUTPUT, 2) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ >>>> + AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ >>>> + >; >>>> + }; >>>> +}; >>>> + >>>> +&cpsw3g { >>>> + pinctrl-0 = <&rgmii1_pins_default>; >>>> +}; >>>> + >>>> +&cpsw_port2 { >>>> + status = "disabled"; >>>> +}; >>>> + >>>> +&mdio_mux_1 { >>>> + status = "disabled"; >>>> +}; >>>> + >>>> +&icssg1_eth { >>>> + pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>; >>>> +}; >>>> + >>>> +&icssg1_emac1 { >>>> + status = "okay"; >>>> + phy-handle = <&icssg1_phy2>; >>>> + phy-mode = "rgmii-id"; >>>> +}; >>>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts >>>> index c08b0223be52..6ae43c12419f 100644 >>>> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts >>>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts >>>> @@ -200,7 +200,7 @@ mdio_mux: mux-controller { >>>> mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; >>>> }; >>>> >>>> - mdio-mux-1 { >>>> + mdio_mux_1: mdio-mux-1 { >>> >>> mdio_mux_1: mdio-mux@1 >>> >> >> Sure. I will update this. >> >>>> compatible = "mdio-mux-multiplexer"; >>>> mux-controls = <&mdio_mux>; >>>> mdio-parent-bus = <&cpsw3g_mdio>; >>> >> > -- Thanks and Regards, Danish