On Tue, Dec 19, 2023 at 01:34:39PM +0100, Alexander Stein wrote: > Bindings say DMA channels are in order Rx, Tx. Adjust the DT nodes > accordingly. > > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi > index a180893ac81e..0f48796e32b2 100644 > --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi > @@ -93,8 +93,8 @@ lpuart0: serial@5a060000 { > assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; > assigned-clock-rates = <80000000>; > power-domains = <&pd IMX_SC_R_UART_0>; > - dma-names = "tx","rx"; > - dmas = <&edma2 9 0 0>, <&edma2 8 0 1>; > + dma-names = "rx", "tx"; > + dmas = <&edma2 8 0 0>, <&edma2 9 0 1>; edma device bind header file already merged. Please include <dt-binding/dma/fsl-edma.h> Change "1" to "FSL_EDMA_RX". Frank > status = "disabled"; > }; > > @@ -107,8 +107,8 @@ lpuart1: serial@5a070000 { > assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; > assigned-clock-rates = <80000000>; > power-domains = <&pd IMX_SC_R_UART_1>; > - dma-names = "tx","rx"; > - dmas = <&edma2 11 0 0>, <&edma2 10 0 1>; > + dma-names = "rx", "tx"; > + dmas = <&edma2 10 0 0>, <&edma2 11 0 1>; > status = "disabled"; > }; > > @@ -121,8 +121,8 @@ lpuart2: serial@5a080000 { > assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; > assigned-clock-rates = <80000000>; > power-domains = <&pd IMX_SC_R_UART_2>; > - dma-names = "tx","rx"; > - dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; > + dma-names = "rx", "tx"; > + dmas = <&edma2 12 0 0>, <&edma2 13 0 1>; > status = "disabled"; > }; > > @@ -135,8 +135,8 @@ lpuart3: serial@5a090000 { > assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; > assigned-clock-rates = <80000000>; > power-domains = <&pd IMX_SC_R_UART_3>; > - dma-names = "tx","rx"; > - dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; > + dma-names = "rx", "tx"; > + dmas = <&edma2 14 0 0>, <&edma2 15 0 1>; > status = "disabled"; > }; > > -- > 2.34.1 >