Bindings say DMA channels are in order Rx, Tx. Adjust the DT nodes
accordingly.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index a180893ac81e..0f48796e32b2 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -93,8 +93,8 @@ lpuart0: serial@5a060000 {
assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_0>;
- dma-names = "tx","rx";
- dmas = <&edma2 9 0 0>, <&edma2 8 0 1>;
+ dma-names = "rx", "tx";
+ dmas = <&edma2 8 0 0>, <&edma2 9 0 1>;
status = "disabled";
};
@@ -107,8 +107,8 @@ lpuart1: serial@5a070000 {
assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_1>;
- dma-names = "tx","rx";
- dmas = <&edma2 11 0 0>, <&edma2 10 0 1>;
+ dma-names = "rx", "tx";
+ dmas = <&edma2 10 0 0>, <&edma2 11 0 1>;
status = "disabled";
};
@@ -121,8 +121,8 @@ lpuart2: serial@5a080000 {
assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_2>;
- dma-names = "tx","rx";
- dmas = <&edma2 13 0 0>, <&edma2 12 0 1>;
+ dma-names = "rx", "tx";
+ dmas = <&edma2 12 0 0>, <&edma2 13 0 1>;
status = "disabled";
};
@@ -135,8 +135,8 @@ lpuart3: serial@5a090000 {
assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <80000000>;
power-domains = <&pd IMX_SC_R_UART_3>;
- dma-names = "tx","rx";
- dmas = <&edma2 15 0 0>, <&edma2 14 0 1>;
+ dma-names = "rx", "tx";
+ dmas = <&edma2 14 0 0>, <&edma2 15 0 1>;
status = "disabled";
};
--
2.34.1
