On 26/01/24 20:51, Nuno Sá wrote: > On Fri, 2024-01-26 at 02:22 +0000, Chris Packham wrote: >> Hi All, >> >> On 4/04/23 03:43, Ibrahim Tilki wrote: >>> changelog: >>> since v5: >>> - dt-binding: add enum value "2" to aux-voltage-chargable >>> - dt-binding: remove adi,trickle-diode-enable >>> - dt-binding: change description of trickle-resistor-ohms >>> - dt-binding: reorder as in example schema >>> - parse "wakeup-source" when irq not requested >>> - remove limitation on max31328 irq and clokout >>> - remove error and warning messages during trickle charger setup >>> >>> since v4: >>> - dt-binding: remove interrupt names. >>> - dt-binding: add description for "interrupts" property >>> - dt-binding: replace deprecated property "trickle-diode-disable" >>> by "aux-voltage-chargeable" >>> - dt-binding: add new property "adi,trickle-diode-enable" >>> - dt-binding: remove "wakeup-source" >>> - use clear_bit instead of __clear_bit >>> - use devm_of_clk_add_hw_provider instead of of_clk_add_provider >>> - use chip_desc pointer as driver data instead of enum. >>> >>> since v3: >>> - add "break" to fix warning: unannotated fall-through >>> Reported-by: kernel test robot <lkp@xxxxxxxxx> >>> >>> since v2: >>> - dt-binding: update title and description >>> - dt-binding: remove last example >>> - drop watchdog support >>> - support reading 12Hr format instead of forcing 24hr at probe time >>> - use "tm_year % 100" instead of range check >>> - refactor max313xx_init for readability >>> >>> Ibrahim Tilki (2): >>> drivers: rtc: add max313xx series rtc driver >>> dt-bindings: rtc: add max313xx RTCs >>> >>> .../devicetree/bindings/rtc/adi,max313xx.yaml | 144 +++ >>> drivers/rtc/Kconfig | 11 + >>> drivers/rtc/Makefile | 1 + >>> drivers/rtc/rtc-max313xx.c | 1053 +++++++++++++++++ >>> 4 files changed, 1209 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml >>> create mode 100644 drivers/rtc/rtc-max313xx.c >> What happened to this series in the end? It kind of went off my radar >> and I forgot about it. >> >> We've been carrying a version of these changes in our local tree for a >> while (and using it quite happily I should add). >> > Hi Chris, > > Also not sure.... In the meantime Ibrahim left ADI so if this is not in shape to > be merged he won't be able to re-spin. If there's a need for a re-spin, please > let me know so I can see internally if there's someone who can continue this > work. I would do it myself if I had the HW. I've got a board with a max31331 so I can test that. I don't have any of the interrupts hooked up so I won't be able to test that. Looks like there was some outstanding discussion around the trickle-charge devicetree properties so I'd need to figure out what was wanted there. I'll try to pick up the last series from the mailing list and go from there.
