changelog:
since v5:
- dt-binding: add enum value "2" to aux-voltage-chargable
- dt-binding: remove adi,trickle-diode-enable
- dt-binding: change description of trickle-resistor-ohms
- dt-binding: reorder as in example schema
- parse "wakeup-source" when irq not requested
- remove limitation on max31328 irq and clokout
- remove error and warning messages during trickle charger setup
since v4:
- dt-binding: remove interrupt names.
- dt-binding: add description for "interrupts" property
- dt-binding: replace deprecated property "trickle-diode-disable"
by "aux-voltage-chargeable"
- dt-binding: add new property "adi,trickle-diode-enable"
- dt-binding: remove "wakeup-source"
- use clear_bit instead of __clear_bit
- use devm_of_clk_add_hw_provider instead of of_clk_add_provider
- use chip_desc pointer as driver data instead of enum.
since v3:
- add "break" to fix warning: unannotated fall-through
Reported-by: kernel test robot <lkp@xxxxxxxxx>
since v2:
- dt-binding: update title and description
- dt-binding: remove last example
- drop watchdog support
- support reading 12Hr format instead of forcing 24hr at probe time
- use "tm_year % 100" instead of range check
- refactor max313xx_init for readability
Ibrahim Tilki (2):
drivers: rtc: add max313xx series rtc driver
dt-bindings: rtc: add max313xx RTCs
.../devicetree/bindings/rtc/adi,max313xx.yaml | 144 +++
drivers/rtc/Kconfig | 11 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-max313xx.c | 1053 +++++++++++++++++
4 files changed, 1209 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml
create mode 100644 drivers/rtc/rtc-max313xx.c
--
2.25.1
