Hi All, On 4/04/23 03:43, Ibrahim Tilki wrote: > changelog: > since v5: > - dt-binding: add enum value "2" to aux-voltage-chargable > - dt-binding: remove adi,trickle-diode-enable > - dt-binding: change description of trickle-resistor-ohms > - dt-binding: reorder as in example schema > - parse "wakeup-source" when irq not requested > - remove limitation on max31328 irq and clokout > - remove error and warning messages during trickle charger setup > > since v4: > - dt-binding: remove interrupt names. > - dt-binding: add description for "interrupts" property > - dt-binding: replace deprecated property "trickle-diode-disable" > by "aux-voltage-chargeable" > - dt-binding: add new property "adi,trickle-diode-enable" > - dt-binding: remove "wakeup-source" > - use clear_bit instead of __clear_bit > - use devm_of_clk_add_hw_provider instead of of_clk_add_provider > - use chip_desc pointer as driver data instead of enum. > > since v3: > - add "break" to fix warning: unannotated fall-through > Reported-by: kernel test robot <lkp@xxxxxxxxx> > > since v2: > - dt-binding: update title and description > - dt-binding: remove last example > - drop watchdog support > - support reading 12Hr format instead of forcing 24hr at probe time > - use "tm_year % 100" instead of range check > - refactor max313xx_init for readability > > Ibrahim Tilki (2): > drivers: rtc: add max313xx series rtc driver > dt-bindings: rtc: add max313xx RTCs > > .../devicetree/bindings/rtc/adi,max313xx.yaml | 144 +++ > drivers/rtc/Kconfig | 11 + > drivers/rtc/Makefile | 1 + > drivers/rtc/rtc-max313xx.c | 1053 +++++++++++++++++ > 4 files changed, 1209 insertions(+) > create mode 100644 Documentation/devicetree/bindings/rtc/adi,max313xx.yaml > create mode 100644 drivers/rtc/rtc-max313xx.c What happened to this series in the end? It kind of went off my radar and I forgot about it. We've been carrying a version of these changes in our local tree for a while (and using it quite happily I should add).