[PATCH v2] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SC8280XP contains two additional tsens instances, providing among
other things thermal measurements for the GPU.

Add these and a GPU thermal-zone.

Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
Changes in v2:
- Drop TM/SROT comments
- Remove polling delays, rely on interrupts
- Link to v1: https://lore.kernel.org/r/20240118-sc8280xp-tsens2_3-v1-1-e86bce14f6bf@xxxxxxxxxxx
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 37 ++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index febf28356ff8..7bfbb1bd8f4a 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -4033,6 +4033,28 @@ tsens1: thermal-sensor@c265000 {
 			#thermal-sensor-cells = <1>;
 		};
 
+		tsens2: thermal-sensor@c251000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c251000 0 0x1ff>,
+			      <0 0x0c224000 0 0x8>;
+			#qcom,sensors = <11>;
+			interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens3: thermal-sensor@c252000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c252000 0 0x1ff>,
+			      <0 0x0c225000 0 0x8>;
+			#qcom,sensors = <5>;
+			interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
@@ -5212,6 +5234,21 @@ cpu-crit {
 			};
 		};
 
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
 		mem-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;

---
base-commit: 943b9f0ab2cfbaea148dd6ac279957eb08b96904
change-id: 20240118-sc8280xp-tsens2_3-a5fd9a48d655

Best regards,
-- 
Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux