On 26.01.2024 16:12, Bjorn Andersson wrote: > The SC8280XP contains two additional tsens instances, providing among > other things thermal measurements for the GPU. > > Add these and a GPU thermal-zone. > > Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx> > --- > Changes in v2: > - Drop TM/SROT comments > - Remove polling delays, rely on interrupts > - Link to v1: https://lore.kernel.org/r/20240118-sc8280xp-tsens2_3-v1-1-e86bce14f6bf@xxxxxxxxxxx > --- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 37 ++++++++++++++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index febf28356ff8..7bfbb1bd8f4a 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -4033,6 +4033,28 @@ tsens1: thermal-sensor@c265000 { > #thermal-sensor-cells = <1>; > }; > > + tsens2: thermal-sensor@c251000 { > + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; > + reg = <0 0x0c251000 0 0x1ff>, > + <0 0x0c224000 0 0x8>; > + #qcom,sensors = <11>; > + interrupts-extended = <&pdc 122 IRQ_TYPE_LEVEL_HIGH>, > + <&pdc 124 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow", "critical"; > + #thermal-sensor-cells = <1>; > + }; > + > + tsens3: thermal-sensor@c252000 { > + compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2"; > + reg = <0 0x0c252000 0 0x1ff>, > + <0 0x0c225000 0 0x8>; > + #qcom,sensors = <5>; > + interrupts-extended = <&pdc 123 IRQ_TYPE_LEVEL_HIGH>, > + <&pdc 125 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow", "critical"; > + #thermal-sensor-cells = <1>; With the sorting issue that Johan mentioned resolved: Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Konrad