Re: [PATCH v4 2/2] Documentation: Add documentation for rt5033 multifunction device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/22/2015 06:02 PM, Lee Jones wrote:
> On Thu, 22 Jan 2015, Beomho Seo wrote:
> 
>> On 01/22/2015 04:41 PM, Lee Jones wrote:
>>> On Thu, 22 Jan 2015, Beomho Seo wrote:
>>>
>>>> This patch device tree binding documentation for rt5033 multifunction device.
>>>>
>>>> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
>>>> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
>>>> Cc: Mark Brown <broonie@xxxxxxxxxx>
>>>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>>>> Cc: Pawel Moll <pawel.moll@xxxxxxx>
>>>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>>>> Cc: Ian campbell <ijc+devicetree@xxxxxxxxxxxxxx>
>>>> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
>>>> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
>>>> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>>> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
>>>
>>> I did not Ack this patch.
>>>
>>> Your new vendor bindings require a DT Ack.
>>>
>>> Although, as the ones I'm concerned with are Regulator related, and
>>> Ack from Mark Brown will also suffice.
>>>
>>
>> I want to apologize for my mistake. I completely misunderstood your reply.
>> Unfortunately, This patch merged by Sebastian at his git.
>> Please tell me what to do.
> 
> That's strange, as I haven't heard anything from Sebastian.
> 
> Anyway, he needs to remove it from his tree until we receive a
> suitable Ack.
> 

OK, If Sebastian remove it from his tree, I will fix Acked-by. And then
wait receive a suitable Ack.

>>>> ---
>>>> Changes in v4
>>>> - none.
>>>> Changes in v3
>>>> - Add Acked-by
>>>> Changes in v2
>>>> - Fix incorrect typo.
>>>> - Align -uamp and -uvolt names with regulator binding suffixes.
>>>> - Drop incorrect phandle.
>>>> - Fix incorrect example.
>>>> ---
>>>>
>>>>  Documentation/devicetree/bindings/mfd/rt5033.txt   |  101 ++++++++++++++++++++
>>>>  .../devicetree/bindings/vendor-prefixes.txt        |    1 +
>>>>  2 files changed, 102 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/mfd/rt5033.txt b/Documentation/devicetree/bindings/mfd/rt5033.txt
>>>> new file mode 100644
>>>> index 0000000..64b23e8
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/mfd/rt5033.txt
>>>> @@ -0,0 +1,101 @@
>>>> +Richtek RT5033 Power management Integrated Circuit
>>>> +
>>>> +RT5033 is a Multifunction device which includes battery charger, fuel gauge,
>>>> +flash LED current source, LDO and synchronous Buck converter for portable
>>>> +applications. It is interfaced to host controller using i2c interface.
>>>> +
>>>> +Required properties:
>>>> +- compatible : Must be "richtek,rt5033"
>>>> +- reg : Specifies the i2c slave address of general part.
>>>> +- interrupts : This i2c devices has an IRQ line connected to the main SoC.
>>>> +- interrupt-parent : The parent interrupt controller.
>>>> +
>>>> +Optional node:
>>>> +Regulators: The regulators of RT5033 have to be instantiated under sub-node
>>>> +named "regulators" using the following format.
>>>> +
>>>> +	regulators {
>>>> +		regulator-name {
>>>> +			regulator-name = LDO/BUCK
>>>> +			regulator subnodes called X, Y and Z
>>>> +		};
>>>> +	};
>>>> +	refer Documentation/devicetree/bindings/regulator/regulator.txt
>>>> +
>>>> +
>>>> +Battery charger: There battery charger of RT5033 have to be instantiated under
>>>> +sub-node named "charger" using the following format.
>>>> +
>>>> +Required properties:
>>>> +- compatible : Must be "richtek,rt5033-charger".
>>>> +- richtek,pre-uamp : Current of pre-charge mode. The pre-charge current levels
>>>> +  are 350 mA to 650 mA programmed by I2C per 100 mA.
>>>> +- richtek,fast-uamp : Current of fast-charge mode. The fast-charge current
>>>> +  levels are 700 mA to 2000 mA programmed by I2C per 100 mA.
>>>> +- richtek,eoc-uamp : This property is end of charge current. Its level 150 mA
>>>> +  to 200 mA.
>>>> +- richtek,pre-threshold-uvolt : Voltage of threshold pre-charge mode. Battery
>>>> +  voltage is below pre-charge threshold voltage, the charger is in pre-charge
>>>> +  mode with pre-charge current. Its levels are 2.3 V  to 3.8 V programmed
>>>> +  by I2C per 0.1 V.
>>>> +- richtek,const-uvolt :  Battery regulation voltage of constant voltage mode.
>>>> +  This voltage level 3.65 V to 4.4 V bye I2C per 0.025 V.
>>>> +
>>>> +	charger {
>>>> +		compatible = "richtek,rt5033-charger";
>>>> +		richtek,pre-uamp = <350000>;
>>>> +		richtek,fast-uamp = <2000000>;
>>>> +		richtek,eoc-uamp = <250000>;
>>>> +		richtek,pre-threshold-uvolt = <3400000>;
>>>> +		richtek,const-uvolt = <4350000>;
>>>> +
>>>> +	};
>>>> +
>>>> +
>>>> +Fuelgauge: There fuelgauge of RT5033 to be instantiated node named "fuelgauge"
>>>> +using the following format.
>>>> +
>>>> +Required properties:
>>>> +- compatible = Must be "richtek,rt5033-battery".
>>>> +
>>>> +	rt5033@35 {
>>>> +		compatible = "richtek,rt5033-battery";
>>>> +		interrupt-parent = <&gpx2>;
>>>> +		interrupts = <3 0>;
>>>> +		reg = <0x35>;
>>>> +	};
>>>> +
>>>> +Example:
>>>> +
>>>> +		rt5033@34 {
>>>> +			compatible = "richtek,rt5033";
>>>> +			reg = <0x34>;
>>>> +			interrupt-parent = <&gpx1>;
>>>> +			interrupts = <5 0>;
>>>> +
>>>> +			regulators {
>>>> +				buck_reg: BUCK {
>>>> +					regulator-name = "BUCK";
>>>> +					regulator-min-microvolt = <1200000>;
>>>> +					regulator-max-microvolt = <1200000>;
>>>> +					regulator-always-on;
>>>> +				};
>>>> +			};
>>>> +
>>>> +			charger {
>>>> +				compatible = "richtek,rt5033-charger";
>>>> +				richtek,pre-uamp = <350000>;
>>>> +				richtek,fast-uamp = <2000000>;
>>>> +				richtek,eoc-uamp = <250000>;
>>>> +				richtek,pre-threshold-uvolt = <3400000>;
>>>> +				richtek,const-uvolt = <4350000>;
>>>> +			};
>>>> +
>>>> +		};
>>>> +
>>>> +		rt5033@35 {
>>>> +				compatible = "richtek,rt5033-battery";
>>>> +				interrupt-parent = <&gpx2>;
>>>> +				interrupts = <3 0>;
>>>> +				reg = <0x35>;
>>>> +		};
>>>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
>>>> index b1df0ad..b6a2ca1 100644
>>>> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>>>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>>>> @@ -134,6 +134,7 @@ ralink	Mediatek/Ralink Technology Corp.
>>>>  ramtron	Ramtron International
>>>>  realtek Realtek Semiconductor Corp.
>>>>  renesas	Renesas Electronics Corporation
>>>> +richtek	Richtek Technology Corporation
>>>>  ricoh	Ricoh Co. Ltd.
>>>>  rockchip	Fuzhou Rockchip Electronics Co., Ltd
>>>>  samsung	Samsung Semiconductor
>>>
>>
>> Thanks,
>> Beomho Seo
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux