On Thu, 22 Jan 2015, Beomho Seo wrote:
> On 01/22/2015 04:41 PM, Lee Jones wrote:
> > On Thu, 22 Jan 2015, Beomho Seo wrote:
> >
> >> This patch device tree binding documentation for rt5033 multifunction device.
> >>
> >> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
> >> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> >> Cc: Mark Brown <broonie@xxxxxxxxxx>
> >> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> >> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> >> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> >> Cc: Ian campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> >> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> >> Signed-off-by: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> >> Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> >> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> >
> > I did not Ack this patch.
> >
> > Your new vendor bindings require a DT Ack.
> >
> > Although, as the ones I'm concerned with are Regulator related, and
> > Ack from Mark Brown will also suffice.
> >
>
> I want to apologize for my mistake. I completely misunderstood your reply.
> Unfortunately, This patch merged by Sebastian at his git.
> Please tell me what to do.
That's strange, as I haven't heard anything from Sebastian.
Anyway, he needs to remove it from his tree until we receive a
suitable Ack.
> >> ---
> >> Changes in v4
> >> - none.
> >> Changes in v3
> >> - Add Acked-by
> >> Changes in v2
> >> - Fix incorrect typo.
> >> - Align -uamp and -uvolt names with regulator binding suffixes.
> >> - Drop incorrect phandle.
> >> - Fix incorrect example.
> >> ---
> >>
> >> Documentation/devicetree/bindings/mfd/rt5033.txt | 101 ++++++++++++++++++++
> >> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> >> 2 files changed, 102 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/mfd/rt5033.txt
> >>
> >> diff --git a/Documentation/devicetree/bindings/mfd/rt5033.txt b/Documentation/devicetree/bindings/mfd/rt5033.txt
> >> new file mode 100644
> >> index 0000000..64b23e8
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/mfd/rt5033.txt
> >> @@ -0,0 +1,101 @@
> >> +Richtek RT5033 Power management Integrated Circuit
> >> +
> >> +RT5033 is a Multifunction device which includes battery charger, fuel gauge,
> >> +flash LED current source, LDO and synchronous Buck converter for portable
> >> +applications. It is interfaced to host controller using i2c interface.
> >> +
> >> +Required properties:
> >> +- compatible : Must be "richtek,rt5033"
> >> +- reg : Specifies the i2c slave address of general part.
> >> +- interrupts : This i2c devices has an IRQ line connected to the main SoC.
> >> +- interrupt-parent : The parent interrupt controller.
> >> +
> >> +Optional node:
> >> +Regulators: The regulators of RT5033 have to be instantiated under sub-node
> >> +named "regulators" using the following format.
> >> +
> >> + regulators {
> >> + regulator-name {
> >> + regulator-name = LDO/BUCK
> >> + regulator subnodes called X, Y and Z
> >> + };
> >> + };
> >> + refer Documentation/devicetree/bindings/regulator/regulator.txt
> >> +
> >> +
> >> +Battery charger: There battery charger of RT5033 have to be instantiated under
> >> +sub-node named "charger" using the following format.
> >> +
> >> +Required properties:
> >> +- compatible : Must be "richtek,rt5033-charger".
> >> +- richtek,pre-uamp : Current of pre-charge mode. The pre-charge current levels
> >> + are 350 mA to 650 mA programmed by I2C per 100 mA.
> >> +- richtek,fast-uamp : Current of fast-charge mode. The fast-charge current
> >> + levels are 700 mA to 2000 mA programmed by I2C per 100 mA.
> >> +- richtek,eoc-uamp : This property is end of charge current. Its level 150 mA
> >> + to 200 mA.
> >> +- richtek,pre-threshold-uvolt : Voltage of threshold pre-charge mode. Battery
> >> + voltage is below pre-charge threshold voltage, the charger is in pre-charge
> >> + mode with pre-charge current. Its levels are 2.3 V to 3.8 V programmed
> >> + by I2C per 0.1 V.
> >> +- richtek,const-uvolt : Battery regulation voltage of constant voltage mode.
> >> + This voltage level 3.65 V to 4.4 V bye I2C per 0.025 V.
> >> +
> >> + charger {
> >> + compatible = "richtek,rt5033-charger";
> >> + richtek,pre-uamp = <350000>;
> >> + richtek,fast-uamp = <2000000>;
> >> + richtek,eoc-uamp = <250000>;
> >> + richtek,pre-threshold-uvolt = <3400000>;
> >> + richtek,const-uvolt = <4350000>;
> >> +
> >> + };
> >> +
> >> +
> >> +Fuelgauge: There fuelgauge of RT5033 to be instantiated node named "fuelgauge"
> >> +using the following format.
> >> +
> >> +Required properties:
> >> +- compatible = Must be "richtek,rt5033-battery".
> >> +
> >> + rt5033@35 {
> >> + compatible = "richtek,rt5033-battery";
> >> + interrupt-parent = <&gpx2>;
> >> + interrupts = <3 0>;
> >> + reg = <0x35>;
> >> + };
> >> +
> >> +Example:
> >> +
> >> + rt5033@34 {
> >> + compatible = "richtek,rt5033";
> >> + reg = <0x34>;
> >> + interrupt-parent = <&gpx1>;
> >> + interrupts = <5 0>;
> >> +
> >> + regulators {
> >> + buck_reg: BUCK {
> >> + regulator-name = "BUCK";
> >> + regulator-min-microvolt = <1200000>;
> >> + regulator-max-microvolt = <1200000>;
> >> + regulator-always-on;
> >> + };
> >> + };
> >> +
> >> + charger {
> >> + compatible = "richtek,rt5033-charger";
> >> + richtek,pre-uamp = <350000>;
> >> + richtek,fast-uamp = <2000000>;
> >> + richtek,eoc-uamp = <250000>;
> >> + richtek,pre-threshold-uvolt = <3400000>;
> >> + richtek,const-uvolt = <4350000>;
> >> + };
> >> +
> >> + };
> >> +
> >> + rt5033@35 {
> >> + compatible = "richtek,rt5033-battery";
> >> + interrupt-parent = <&gpx2>;
> >> + interrupts = <3 0>;
> >> + reg = <0x35>;
> >> + };
> >> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> >> index b1df0ad..b6a2ca1 100644
> >> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> >> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> >> @@ -134,6 +134,7 @@ ralink Mediatek/Ralink Technology Corp.
> >> ramtron Ramtron International
> >> realtek Realtek Semiconductor Corp.
> >> renesas Renesas Electronics Corporation
> >> +richtek Richtek Technology Corporation
> >> ricoh Ricoh Co. Ltd.
> >> rockchip Fuzhou Rockchip Electronics Co., Ltd
> >> samsung Samsung Semiconductor
> >
>
> Thanks,
> Beomho Seo
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
