On Wed, Jan 21, 2015 at 12:35:51PM +0000, Lee Jones wrote: > I think to set an edge trigger on an IRQ, you should instead do so via > irq_set_irq_type(), or have a missed a line or two? Setting the IRQ type in request_irq() is perfectly acceptable. include/linux/interrupt.h: /* * These correspond to the IORESOURCE_IRQ_* defines in * linux/ioport.h to select the interrupt line behaviour. When * requesting an interrupt without specifying a IRQF_TRIGGER, the * setting should be assumed to be "as already configured", which * may be as per machine or firmware initialisation. */ #define IRQF_TRIGGER_NONE 0x00000000 #define IRQF_TRIGGER_RISING 0x00000001 #define IRQF_TRIGGER_FALLING 0x00000002 #define IRQF_TRIGGER_HIGH 0x00000004 #define IRQF_TRIGGER_LOW 0x00000008 -- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
