On Fri, Dec 22, 2023 at 01:44:49PM +0800, Leong Ching Swee wrote:
> From: Swee Leong Ching <leong.ching.swee@xxxxxxxxx>
>
> There is no support for per DMA channel interrupt for non-MSI platform,
> where the MAC's per channel interrupt hooks up to interrupt controller(GIC)
> through shared peripheral interrupt(SPI) to handle interrupt from TX/RX
> transmit channel.
>
> This patch generalize the existing MSI ISR to also support non-MSI
> platform.
>
> Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@xxxxxxxxx>
> Signed-off-by: Swee Leong Ching <leong.ching.swee@xxxxxxxxx>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 +--
> .../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +-
> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 29 ++++++++++---------
> include/linux/stmmac.h | 4 +--
> 4 files changed, 21 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> index 60283543ffc8..f0ec69af96c9 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> @@ -952,7 +952,7 @@ static int stmmac_config_single_msi(struct pci_dev *pdev,
>
> res->irq = pci_irq_vector(pdev, 0);
> res->wol_irq = res->irq;
> - plat->flags &= ~STMMAC_FLAG_MULTI_MSI_EN;
> + plat->flags &= ~STMMAC_FLAG_MULTI_IRQ_EN;
> dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n",
> __func__);
>
> @@ -1004,7 +1004,7 @@ static int stmmac_config_multi_msi(struct pci_dev *pdev,
> if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX)
> res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec);
>
> - plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
> + plat->flags |= STMMAC_FLAG_MULTI_IRQ_EN;
> dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__);
>
> return 0;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> index 84d3a8551b03..5f649106ffcd 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> @@ -175,7 +175,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
>
> value = readl(ioaddr + DMA_BUS_MODE);
>
> - if (dma_cfg->multi_msi_en) {
> + if (dma_cfg->multi_irq_en) {
> value &= ~DMA_BUS_MODE_INTM_MASK;
> value |= (DMA_BUS_MODE_INTM_MODE1 << DMA_BUS_MODE_INTM_SHIFT);
> }
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 47de466e432c..30cc9edb4198 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -129,8 +129,8 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
> /* For MSI interrupts handling */
> static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
> static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
> -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
> -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
> +static irqreturn_t stmmac_tx_queue_interrupt(int irq, void *data);
> +static irqreturn_t stmmac_rx_queue_interrupt(int irq, void *data);
Let's use the next names instead:
+static irqreturn_t stmmac_dma_tx_interrupt(int irq, void *data);
+static irqreturn_t stmmac_dma_rx_interrupt(int irq, void *data);
It would be semantically more correct and would refer to the
stmmac_dma_interrupt() handler.
> static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue);
> static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue);
> static void stmmac_reset_queues_param(struct stmmac_priv *priv);
> @@ -3602,7 +3602,7 @@ static void stmmac_free_irq(struct net_device *dev,
> }
> }
>
> -static int stmmac_request_irq_multi_msi(struct net_device *dev)
> +static int stmmac_request_irq_multi(struct net_device *dev)
> {
> struct stmmac_priv *priv = netdev_priv(dev);
> enum request_irq_err irq_err;
> @@ -3701,13 +3701,13 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
> if (i >= MTL_MAX_RX_QUEUES)
> break;
> - if (priv->rx_irq[i] == 0)
> + if (priv->rx_irq[i] <= 0)
Why? What about just using a temporary variable in
stmmac_get_platform_resources() to get the Per-channel DMA IRQs and
not saving error number in priv->rx_irq[]?
> continue;
>
> int_name = priv->int_name_rx_irq[i];
> sprintf(int_name, "%s:%s-%d", dev->name, "rx", i);
> ret = request_irq(priv->rx_irq[i],
> - stmmac_msi_intr_rx,
> + stmmac_rx_queue_interrupt,
> 0, int_name, &priv->dma_conf.rx_queue[i]);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> @@ -3726,13 +3726,13 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
> if (i >= MTL_MAX_TX_QUEUES)
> break;
> - if (priv->tx_irq[i] == 0)
> + if (priv->tx_irq[i] <= 0)
ditto.
> continue;
>
> int_name = priv->int_name_tx_irq[i];
> sprintf(int_name, "%s:%s-%d", dev->name, "tx", i);
> ret = request_irq(priv->tx_irq[i],
> - stmmac_msi_intr_tx,
> + stmmac_tx_queue_interrupt,
> 0, int_name, &priv->dma_conf.tx_queue[i]);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
Please fix the error message strings in stmmac_request_irq_multi_msi()
too.
> @@ -3811,8 +3811,8 @@ static int stmmac_request_irq(struct net_device *dev)
> int ret;
>
> /* Request the IRQ lines */
> - if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN)
> - ret = stmmac_request_irq_multi_msi(dev);
> + if (priv->plat->flags & STMMAC_FLAG_MULTI_IRQ_EN)
> + ret = stmmac_request_irq_multi(dev);
> else
> ret = stmmac_request_irq_single(dev);
>
> @@ -6075,7 +6075,7 @@ static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> +static irqreturn_t stmmac_tx_queue_interrupt(int irq, void *data)
> {
> struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)data;
> struct stmmac_dma_conf *dma_conf;
> @@ -6107,7 +6107,7 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
> +static irqreturn_t stmmac_rx_queue_interrupt(int irq, void *data)
> {
> struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)data;
> struct stmmac_dma_conf *dma_conf;
> @@ -7456,8 +7456,11 @@ int stmmac_dvr_probe(struct device *device,
> priv->plat = plat_dat;
> priv->ioaddr = res->addr;
> priv->dev->base_addr = (unsigned long)res->addr;
> - priv->plat->dma_cfg->multi_msi_en =
> - (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN);
> +
> + if (res->rx_irq[0] > 0 && res->tx_irq[0] > 0) {
> + priv->plat->flags |= STMMAC_FLAG_MULTI_IRQ_EN;
> + priv->plat->dma_cfg->multi_irq_en = true;
> + }
This is wrong. It activates the stmmac_request_irq_multi_msi() method
to assign all the IRQ handlers to the individual IRQs. Even if DMA
IRQs line are available it doesn't mean that for instance Safety
Feature IRQs too. So it's better to rely on the glue drivers to set
that flag as before and leave the code as is.
-Serge(y)
>
> priv->dev->irq = res->irq;
> priv->wol_irq = res->wol_irq;
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index dee5ad6e48c5..b950e6f9761d 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -98,7 +98,7 @@ struct stmmac_dma_cfg {
> int mixed_burst;
> bool aal;
> bool eame;
> - bool multi_msi_en;
> + bool multi_irq_en;
> bool dche;
> };
>
> @@ -215,7 +215,7 @@ struct dwmac4_addrs {
> #define STMMAC_FLAG_TSO_EN BIT(4)
> #define STMMAC_FLAG_SERDES_UP_AFTER_PHY_LINKUP BIT(5)
> #define STMMAC_FLAG_VLAN_FAIL_Q_EN BIT(6)
> -#define STMMAC_FLAG_MULTI_MSI_EN BIT(7)
> +#define STMMAC_FLAG_MULTI_IRQ_EN BIT(7)
> #define STMMAC_FLAG_EXT_SNAPSHOT_EN BIT(8)
> #define STMMAC_FLAG_INT_SNAPSHOT_EN BIT(9)
> #define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI BIT(10)
> --
> 2.34.1
>
>
