On 19/12/2023 12:58, Varada Pavani wrote: > Remove extra spaces and fix spelling mistakes in 'drivers/ > clk/samsung/clk-cpu.c' and 'drivers/clk/samsung/clk-cpu.h' > > Signed-off-by: Varada Pavani <v.pavani@xxxxxxxxxxx> > --- > drivers/clk/samsung/clk-cpu.c | 6 +++--- > drivers/clk/samsung/clk-cpu.h | 2 +- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c > index 3e62ade120c5..18568b8b1b9b 100644 > --- a/drivers/clk/samsung/clk-cpu.c > +++ b/drivers/clk/samsung/clk-cpu.c > @@ -19,7 +19,7 @@ > * clock and the corresponding rate changes of the auxillary clocks of the CPU > * domain. The platform clock driver provides a clock register configuration > * for each configurable rate which is then used to program the clock hardware > - * registers to acheive a fast co-oridinated rate change for all the CPU domain > + * registers to achieve a fast co-oridinated rate change for all the CPU domain > * clocks. > * > * On a rate change request for the CPU clock, the rate change is propagated > @@ -181,7 +181,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, > * If the old parent clock speed is less than the clock speed of > * the alternate parent, then it should be ensured that at no point > * the armclk speed is more than the old_prate until the dividers are > - * set. Also workaround the issue of the dividers being set to lower > + * set. Also workaround the issue of the dividers being set to lower Why? The double-space is correct. > * values before the parent clock speed is set to new lower speed > * (this can result in too high speed of armclk output clocks). > */ > @@ -303,7 +303,7 @@ static int exynos5433_cpuclk_pre_rate_change(struct clk_notifier_data *ndata, > * If the old parent clock speed is less than the clock speed of > * the alternate parent, then it should be ensured that at no point > * the armclk speed is more than the old_prate until the dividers are > - * set. Also workaround the issue of the dividers being set to lower > + * set. Also workaround the issue of the dividers being set to lower Why? > * values before the parent clock speed is set to new lower speed > * (this can result in too high speed of armclk output clocks). > */ > diff --git a/drivers/clk/samsung/clk-cpu.h b/drivers/clk/samsung/clk-cpu.h > index fc9f67a3b22e..e0a1651174e6 100644 > --- a/drivers/clk/samsung/clk-cpu.h > +++ b/drivers/clk/samsung/clk-cpu.h > @@ -33,7 +33,7 @@ struct exynos_cpuclk_cfg_data { > * @hw: handle between CCF and CPU clock. > * @alt_parent: alternate parent clock to use when switching the speed > * of the primary parent clock. > - * @ctrl_base: base address of the clock controller. > + * @ctrl_base: base address of the clock controller. Why only here and not in other places? Best regards, Krzysztof