RE: [PATCH 2/2] clk: samsung: Fix typo error and extra space

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Krzysztof,

-----Original Message-----
From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@xxxxxxxxxx] 
Sent: 19 December 2023 17:36
To: Varada Pavani <v.pavani@xxxxxxxxxxx>; mturquette@xxxxxxxxxxxx; sboyd@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; s.nawrocki@xxxxxxxxxxx; tomasz.figa@xxxxxxxxx
Cc: linux-samsung-soc@xxxxxxxxxxxxxxx; alim.akhtar@xxxxxxxxxxx; aswani.reddy@xxxxxxxxxxx; pankaj.dubey@xxxxxxxxxxx
Subject: Re: [PATCH 2/2] clk: samsung: Fix typo error and extra space

On 19/12/2023 12:58, Varada Pavani wrote:
> Remove extra spaces and fix spelling mistakes in 'drivers/ 
> clk/samsung/clk-cpu.c' and 'drivers/clk/samsung/clk-cpu.h'
> 
> Signed-off-by: Varada Pavani <v.pavani@xxxxxxxxxxx>
> ---
>  drivers/clk/samsung/clk-cpu.c | 6 +++---  
> drivers/clk/samsung/clk-cpu.h | 2 +-
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-cpu.c 
> b/drivers/clk/samsung/clk-cpu.c index 3e62ade120c5..18568b8b1b9b 
> 100644
> --- a/drivers/clk/samsung/clk-cpu.c
> +++ b/drivers/clk/samsung/clk-cpu.c
> @@ -19,7 +19,7 @@
>   * clock and the corresponding rate changes of the auxillary clocks of the CPU
>   * domain. The platform clock driver provides a clock register configuration
>   * for each configurable rate which is then used to program the clock 
> hardware
> - * registers to acheive a fast co-oridinated rate change for all the 
> CPU domain
> + * registers to achieve a fast co-oridinated rate change for all the 
> + CPU domain
>   * clocks.
>   *
>   * On a rate change request for the CPU clock, the rate change is 
> propagated @@ -181,7 +181,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
>  	 * If the old parent clock speed is less than the clock speed of
>  	 * the alternate parent, then it should be ensured that at no point
>  	 * the armclk speed is more than the old_prate until the dividers are
> -	 * set.  Also workaround the issue of the dividers being set to lower
> +	 * set. Also workaround the issue of the dividers being set to lower

Why? The double-space is correct.

Okay, I couldn’t see any double space at the end of the statement apart from this line and below one. So updated to have uniformity.


>  	 * values before the parent clock speed is set to new lower speed
>  	 * (this can result in too high speed of armclk output clocks).
>  	 */
> @@ -303,7 +303,7 @@ static int exynos5433_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
>  	 * If the old parent clock speed is less than the clock speed of
>  	 * the alternate parent, then it should be ensured that at no point
>  	 * the armclk speed is more than the old_prate until the dividers are
> -	 * set.  Also workaround the issue of the dividers being set to lower
> +	 * set. Also workaround the issue of the dividers being set to lower

Why?

Same as above.

>  	 * values before the parent clock speed is set to new lower speed
>  	 * (this can result in too high speed of armclk output clocks).
>  	 */
> diff --git a/drivers/clk/samsung/clk-cpu.h 
> b/drivers/clk/samsung/clk-cpu.h index fc9f67a3b22e..e0a1651174e6 
> 100644
> --- a/drivers/clk/samsung/clk-cpu.h
> +++ b/drivers/clk/samsung/clk-cpu.h
> @@ -33,7 +33,7 @@ struct exynos_cpuclk_cfg_data {
>   * @hw:	handle between CCF and CPU clock.
>   * @alt_parent: alternate parent clock to use when switching the speed
>   *	of the primary parent clock.
> - * @ctrl_base:	base address of the clock controller.
> + * @ctrl_base: base address of the clock controller.

Why only here and not in other places?

Will fix in V2 for this file.

Thanks for the review!

Best regards,
Krzysztof








[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux